Belt Tensioner - Remove and Install - Tractor
Removal Procedure
- Remove bolts (1) and panel assembly (2) .
Show/hide table
Illustration 1 | g02568457 |
- Disconnect belt (3). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" for the correct removal and installation procedure for the belt.
Show/hide table
Illustration 2 | g02584236 |
- Remove bolt (5) (not shown) and belt tensioner (4) .
Installation Procedure
- Install belt tensioner (4) in reverse order of removal.
- Tighten bolts (1) to a torque of 15 ± 3 N·m (133 ± 27 lb in).
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
980K Wheel Loader Power Train Transmission Hydraulic Control Operation
992K Wheel Loader Axle Breaker Relief Valve - Clean
980K Wheel Loader Machine Electronic Control System General Information
D6K2 Track-Type Tractor Mounting and Dismounting
980K Wheel Loader Electronic Control Module (ECM) - Configure
D6K2 Track-Type Tractor Declaration of Conformity
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Charge Relief Valve - Test and Adjust
CG137-08 and CG137-12 Engines Ignition System Timing - Check/Adjust
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Operational Checks
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
D6N Track-Type Tractor Hydraulic System Location of Electrical Components
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Temperature Regulator - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Visual Inspection
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System General Troubleshooting Information
854K Wheel Dozer and 992K Wheel Loader Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install - Tractor
D11T Track-Type Tractor Engine Supplement Prelubrication Oil Pump - Remove and Install
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
C3.4B Industrial Engine Fan Clearance - Check
994H Wheel Loader Engine Supplement Pump Drive (Rear) from Engine - Separate
994H Wheel Loader Engine Supplement Pump Drive (Rear) to Engine - Connect
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only