Electrohydraulic Control (Joystick) - Remove and Install
Start By:
- Release the hydraulic system pressure.
- Remove cover (1).
Show/hide table
Illustration 2 g02584596 - Remove cover (2).
Show/hide table
Illustration 3 g02584616 - Cut cable strap (3). Disconnect harness assemblies (4).
Show/hide table
Illustration 4 g02584636 - Remove nuts (6) and remove electrohydraulic control (5).
Show/hide table
Illustration 1 | g02584536 |
- Install electrohydraulic control (5) in the reverse order of removal.
- Tighten nuts (6) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten nuts (6) to a torque of
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System General Troubleshooting Information
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Visual Inspection
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Temperature Regulator - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Belt Tensioner - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
980K Wheel Loader Power Train Transmission Hydraulic Control Operation
992K Wheel Loader Axle Breaker Relief Valve - Clean
980K Wheel Loader Machine Electronic Control System General Information
D6K2 Track-Type Tractor Mounting and Dismounting
980K Wheel Loader Electronic Control Module (ECM) - Configure
D6K2 Track-Type Tractor Declaration of Conformity
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Charge Relief Valve - Test and Adjust
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install - Tractor
D11T Track-Type Tractor Engine Supplement Prelubrication Oil Pump - Remove and Install
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
C3.4B Industrial Engine Fan Clearance - Check
994H Wheel Loader Engine Supplement Pump Drive (Rear) from Engine - Separate
994H Wheel Loader Engine Supplement Pump Drive (Rear) to Engine - Connect
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only
D9T Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C7.1 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Pilot Only System
C7.1 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install - Heated Nozzle Connection
D6K2 Track-Type Tractor Operator Controls