Prelubrication Oil Pump - Remove and Install
拆卸步骤
开始:
- 拆下底部防护罩。
- 断开软管组件 (2) 、线束组件 (3) 和扎带 (4) 。
Show/hide table
 | |
| 图 1 | g02641036 |
- 拆下螺母 (1) 。 由两个人一起拆下预润滑油泵 (5) 。 预润滑油泵 (5) 的重量约为 23 kg (50 lb)。
- 从泵组件 (8) 上拆下螺栓 (6) 和支架 (7) 。
Show/hide table
 | |
| 图 2 | g02646452 |
安装步骤
- 按与拆卸相反的顺序安装预润滑油泵 (5) 。
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install - Tractor
854K Wheel Dozer and 992K Wheel Loader Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System General Troubleshooting Information
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Visual Inspection
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Temperature Regulator - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Belt Tensioner - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
980K Wheel Loader Power Train Transmission Hydraulic Control Operation
992K Wheel Loader Axle Breaker Relief Valve - Clean
980K Wheel Loader Machine Electronic Control System General Information
D6K2 Track-Type Tractor Mounting and Dismounting
980K Wheel Loader Electronic Control Module (ECM) - Configure
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
C3.4B Industrial Engine Fan Clearance - Check
994H Wheel Loader Engine Supplement Pump Drive (Rear) from Engine - Separate
994H Wheel Loader Engine Supplement Pump Drive (Rear) to Engine - Connect
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only
D9T Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C7.1 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Pilot Only System
C7.1 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install - Heated Nozzle Connection
D6K2 Track-Type Tractor Operator Controls
980K Wheel Loader Cooling System Water Temperature Regulator - Replace
D6K2 Track-Type Tractor Battery Disconnect Switch