Pump Drive (Rear) from Engine - Separate
Separation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-9200 | Lever Puller Hoist | 1 |
| B | 138-7575 | Link Bracket | 2 |
Start By:
- Remove the engine, the rear pump drive, and the torque converter. Refer to Disassembly and Assembly, "Engine, Pump Drive (Rear), and Torque Converter - Remove".
- Attach Tooling (A), Tooling (B), and a suitable lifting device to torque converter (1). The weight of torque converter (1) is approximately 1134 kg (2500 lb). Remove bolts (2). Remove torque converter (2) .
Show/hide table
 | |
| Illustration 1 | g02586176 |
- Remove O-ring seal (3) .
Show/hide table
 | |
| Illustration 2 | g02586316 |
- Attach a suitable lifting device to bracket (4). The weight of bracket (4) is approximately 63 kg (140 lb). Remove bolts (5) and bracket (4). Repeat this step for the opposite side.
Show/hide table
 | |
| Illustration 3 | g02586183 |
- Attach a suitable lifting device to pump drive (6) and the attached pumps. The weight of pump drive (6) and the attached pumps is approximately 1610 kg (3550 lb).
Show/hide table
 | |
| Illustration 4 | g02586186 |
- Remove bolts (7) and bolts (8). Remove pump drive (6) .
Show/hide table
 | |
| Illustration 5 | g02586239 |
Show/hide table
 | |
| Illustration 6 | g02586216 |
- Remove O-ring seal (9) .
Show/hide table
 | |
| Illustration 7 | g02586278 |
Caterpillar Information System:
C3.4B Industrial Engine Fan Clearance - Check
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
D11T Track-Type Tractor Engine Supplement Prelubrication Oil Pump - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install - Tractor
854K Wheel Dozer and 992K Wheel Loader Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System General Troubleshooting Information
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Visual Inspection
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Temperature Regulator - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Belt Tensioner - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
980K Wheel Loader Power Train Transmission Hydraulic Control Operation
994H Wheel Loader Engine Supplement Pump Drive (Rear) to Engine - Connect
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only
D9T Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C7.1 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Pilot Only System
C7.1 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install - Heated Nozzle Connection
D6K2 Track-Type Tractor Operator Controls
980K Wheel Loader Cooling System Water Temperature Regulator - Replace
D6K2 Track-Type Tractor Battery Disconnect Switch
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Assemble
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM Diagnostic Code List
2011/06/08 D11 Made-To-Order (MTO) Track Group Part Numbers Have Changed {4170}
980K Wheel Loader Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate