1986/06/02 Caterpillar


New Electric Shutoff Groups With Manual Override Available{1259}

Usage:


3208 Marine Engines With Energize-To-Shutoff Fuel Solenoid (An Attachment)

Description of Change: New electrical shutoff groups, 12 and 24 volt, with manual override are available as an attachment on 3208 Marine Engines. The manual override feature enables the engine to be shut off in the event of an electrical or solenoid malfunction. The top of the plungers in the new solenoids have internal 1/4-28 threads. See the illustration. A threaded rod can be installed in the top of the plunger through a hole in the rubber boot. The threaded rod can be pushed down to shut off the fuel and stop the engine.

Adaptable As: The new 7C948 (24 volt) and 7C949 (12 volt) Electrical Shutoff Groups are adaptable as direct replacements for the earlier attachment, energize-to-shutoff, electrical shutoff groups. The components of the new 7C948 Electrical Shutoff Group are listed in Chart A. The components of the new 7C949 Electrical Shutoff Group are listed in Chart B.


Location where 1/4-28 threaded rod can be installed to push the solenoid plunger down to shutoff fuel and stop the engine.

Caterpillar Information System:

1986/06/02 Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02 Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02 7N129 Or 9S2259 Voltage Regulator Can Not Be Adjusted For Voltage Output{1405,1410}
1986/06/02 New Coupling Removal Tools For XT Hose{0618}
1986/06/02 New "Two Inch" Gauges, Indicator And Senders Available{7450}
1986/06/02 More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02 The Multi-Purpose Cleaners That Do It All (NACD Only){0645}
1986/05/26 Replaceable Wire Harness Connector Assemblies Available{1408}
1986/05/26 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}
1986/05/26 Wiper Motor Grounding{7305}
1986/05/26 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels{7455,7453}
1986/05/26 Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/06/02 New Paper Towels Available{0600}
1986/06/09 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09 Hose Clamp Recommendations For ATAAC Engines{1058,1087}
1986/06/09 Cleaning Procedure For Air-To-Air Aftercooler On ATAAC Engines{1063}
1986/06/09 Address And Phone Number For Ordering Fabricated Tool Drawings{0600}
1986/06/09 Flywheel Housing With 6° Offset Transmission Mounting Holes Must Be Used In GMC Trucks{1000,1157}
1986/06/09 New Seal Prevents Oil Leakage From Threads Of Magnetic Speed Pickups{7487,7462}
1986/06/09 New Service Tools Available{0600}
1986/06/09 Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09 Nitrite Test Kit Available For Cooling Systems{0651,1350,1395}
1986/06/16 Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16 Improvements For Caterpillar 3161 Governors{1264}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.