1986/06/02 Caterpillar


The Multi-Purpose Cleaners That Do It All (NACD Only){0645}

Usage:


Until now, to do the right cleaning job, you had a lot of narrow choices...because there were a lot of narrow cleaners.

New HYDROSOLV cleaners from Caterpillar eliminate that problem. Together they do a full range of shop cleaning jobs...from lifting the toughest carbon deposits, to degreasing, to cleaning equipment, counter tops, appliances and shop floors.

They do it without the risks of many present day cleaners. In solution, Hydrosolv cleaners are less than 1% caustic. They're nonflammable; have no offensive odor; and when used as directed they're safe for all critical surfaces, painted or polished, including all ferrous metals, most nonferrous metals, rubbers and plastics.


Hand scrub and spray applications.

Neither is touchy about working conditions. They dissolve completely in both soft and hard water, keep cleaning down to 21°C (70°F) and diluted working strength solutions can be drained to existing sewer systems. (Check local regulations on disposal.)

Hydrosolv cleaners will save you money, too. Their advanced formulas work fast, reducing cleaning time on most jobs. As little as 5% solution puts them at working strength. If you're still using mineral spirits, in some applications you can save up to 70% by switching to Hydrosolv. And your shop will be a safer and more pleasant place to work.

With only two cleaners, it's easier to comply with the tougher "right to know" laws.

So don't be a cleaner collector. Instead, rely on these two Hydrosolv products to handle all your cleaning needs.


Equipment cleaning/degreasing.

Hydrosolv 4165

A medium to heavy-duty liquid alkaline cleaner for use in steam, spray wands and hand scrubbing jobs. An excellent degreaser. Its unique blend of wetting and emulsifying agents lifts off even the toughest soils. Then it holds oils in suspension, leaving surfaces clean, film free - eliminating the need for rinsing. Its inhibitors also help protect cleaned surfaces from flash rust and corrosion.

Check its other features against your present cleaner.

* Can replace mineral spirits in many applications.
* Offers a safer alternative. Nonflammable. No offensive vapor or odor.
* At proper mixtures, safe and effective on painted or unpainted surfaces.
* Cuts cleaning cost. A 5% solution in water does superior cleaning on most jobs.
* Reduced cleaning time and temperatures; save money too.
* Dissolves completely in hot or cold water.
* Protects against flash rust.


Hot dip and dunker tank operations.

Hydrosolv 100

For the toughest cleaning jobs. This extra heavy-duty phosphate-free liquid alkaline cleaner does not stop halfway. It strips off stubborn carbon without hand scrubbing, melts away grease and baked on deposits on engine, transmission and undercarriage components. Specially formulated for hot-dip and dunker washers. Like Hydrosolv 4165, it needs no rinsing and leaves no chalky residue.

Other features your present cleaner cannot match:

* Superior cleaning at water temperatures as low as 21°C (70°F).
* Handles the toughest deposits without harming polished surfaces.
* Works in both hard and soft water.
* Nonflammable; no flash point to worry about.
* Built-in inhibitors help protect against flash rust.


All types of janitorial maintenance and floor cleaning.

Factory-Proven To The Highest Standards

Hydrosolv products were developed by Caterpillar for in-plant use. They've been proven in Caterpillar factories, where cleaning standards are rigid and the cleaning jobs the toughest anywhere.

And, more than delivering safe, superior cleaning, they lowered costs, cut handling time, and reduced cleaner inventory, too.

You can put these advantages to work in your shop. Ordering and inventory control are easy. You can do it through the Caterpillar parts system.

To order, use the Caterpillar parts system or contact your nearest Caterpillar Dealer. Presently available in the U.S. And Canada only.

For more information, see "General Instructions and Application Guide" for Caterpillar Hydrosolv 4165/Hydrosolv 100 Liquid Alkaline Cleaners, Form LEHQ6101. A concentration and PH test kit can be obtained by contacting the Caterpillar Service Technology Group at:

... 309-675-6713

... 1-800-541-TOOL (inside Illinois)

... 1-800-542-TOOL (outside Illinois)

... 1-800-523-TOOL (Canada)

Caterpillar Information System:

1986/05/26 Replaceable Wire Harness Connector Assemblies Available{1408}
1986/05/26 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}
1986/05/26 Wiper Motor Grounding{7305}
1986/05/26 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels{7455,7453}
1986/05/26 Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26 How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/19 Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}
1986/05/19 Prevent Gasket Leakage On 3406B Truck Engines Equipped With Jake Brakes{1058,1063}
1986/05/19 List Of Metal Surface Reconditioning Products Available From Caterpillar{0674,1000}
1986/05/19 Special Instructions Have A New Look{0374}
1986/05/19 New Aftercooler Gasket Provides Improved Torque Retention{1064}
1986/05/19 How To Use SIRS (Service Information Retrieval System) On The Worldwide Information System (All Dealers except NACD){0374}
1986/06/02 More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02 New "Two Inch" Gauges, Indicator And Senders Available{7450}
1986/06/02 New Coupling Removal Tools For XT Hose{0618}
1986/06/02 7N129 Or 9S2259 Voltage Regulator Can Not Be Adjusted For Voltage Output{1405,1410}
1986/06/02 Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02 Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02 New Electric Shutoff Groups With Manual Override Available{1259}
1986/06/02 New Paper Towels Available{0600}
1986/06/09 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09 Hose Clamp Recommendations For ATAAC Engines{1058,1087}
1986/06/09 Cleaning Procedure For Air-To-Air Aftercooler On ATAAC Engines{1063}
1986/06/09 Address And Phone Number For Ordering Fabricated Tool Drawings{0600}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.