1986/05/19 Caterpillar

Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}

Usage:

All Caterpillar Natural Gas Engines

A 6V9060 Spark Timing Adapter Group is now available to use with the 6V3100 Timing Indicator Group on all Caterpillar Natural Gas Engines. The adapter group includes a fiber optic cable, a signal receiver and a transmitter for input into the timing indicator. The timing indicator connects to the engine in the same manner as on a diesel engine, except the "Injection or Spark Transducer Input" is connected to the adapter group.

Components of 6V9060 Spark Timing Adapter Group.

Connect the adapter transmitter to the primary coil terminals (low voltage) for No. 1 cylinder. Dynamic timing is shown in the normal manner on the timing indicator.

Show/hide table

NOTICE

The timing adapter will be damaged if connected to the secondary (high voltage) side of a coil.

The timing adapter can be used either on engines with individual coils for the secondary (high) voltage, or on engines with integral coils.

Special Instruction SEHS8580 is packaged with the 6V9060 Spark Timing Adapter Group.

Caterpillar Information System:

1986/05/19 Prevent Gasket Leakage On 3406B Truck Engines Equipped With Jake Brakes{1058,1063}

1986/05/19 List Of Metal Surface Reconditioning Products Available From Caterpillar{0674,1000}

1986/05/19 Special Instructions Have A New Look{0374}

1986/05/19 New Aftercooler Gasket Provides Improved Torque Retention{1064}

1986/05/19 How To Use SIRS (Service Information Retrieval System) On The Worldwide Information System (All Dealers except NACD){0374}

1986/05/19 How To Use SIRS (Service Information Retrieval System) On The Dealer Terminal System (NACD Dealers){0374}

1986/05/19 How To Use SIRS (Service Information Retrieval System) On Microfiche{0374}

1986/05/12 New 8T5334 Surface Temperature Thermocouple Probe Available{0776,0600}

1986/05/12 6V7921 Seal Kit Available For 8T3115 Portable Field Track Lubricator{0615,0645,4170}

1986/05/12 Bolt And Washer Added To Engine Air Lines Group To Help Retain Pipes{1058,1060,1050}

1986/05/12 Identification Of Crankshafts For Marine Society Approval{1202}

1986/05/12 New Service Meter Kits Used For Service Replacement{7480}

1986/05/26 How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}

1986/05/26 Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}

1986/05/26 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels{7455,7453}

1986/05/26 Wiper Motor Grounding{7305}

1986/05/26 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}

1986/05/26 Replaceable Wire Harness Connector Assemblies Available{1408}

1986/06/02 The Multi-Purpose Cleaners That Do It All (NACD Only){0645}

1986/06/02 More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}

1986/06/02 New "Two Inch" Gauges, Indicator And Senders Available{7450}

1986/06/02 New Coupling Removal Tools For XT Hose{0618}

1986/06/02 7N129 Or 9S2259 Voltage Regulator Can Not Be Adjusted For Voltage Output{1405,1410}

1986/06/02 Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}