1986/05/26 Caterpillar

Replaceable Wire Harness Connector Assemblies Available{1408}

Usage:

All applications using molded rubber multiple-bullet connectors

Molded rubber multiple-bullet connector assemblies are now available. The connector assemblies have 22cm (8") of wire attached. The connector assemblies are available with three pin connectors (7P791, 7P792), six pin connectors (5P3175, 5P3176), and eight pin connectors (5P3160, 5P3161) (see illustrations). Wire harness assemblies with these type of connectors, that formerly required complete replacement, may now be repaired and reused.

NOTE: The connector assemblies are not for replacement of Sure-Seal® connectors or metal shell connectors. Use the 6V3000 Repair Kit to repair or replace Sure-Seal® connectors.

Three pin connectors.

Six pin connectors.

Eight pin connectors.

Caterpillar Information System:

1986/05/26 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}

1986/05/26 Wiper Motor Grounding{7305}

1986/05/26 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels{7455,7453}

1986/05/26 Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}

1986/05/26 How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}

1986/05/19 Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}

1986/05/19 Prevent Gasket Leakage On 3406B Truck Engines Equipped With Jake Brakes{1058,1063}

1986/05/19 List Of Metal Surface Reconditioning Products Available From Caterpillar{0674,1000}

1986/05/19 Special Instructions Have A New Look{0374}

1986/05/19 New Aftercooler Gasket Provides Improved Torque Retention{1064}

1986/05/19 How To Use SIRS (Service Information Retrieval System) On The Worldwide Information System (All Dealers except NACD){0374}

1986/05/19 How To Use SIRS (Service Information Retrieval System) On The Dealer Terminal System (NACD Dealers){0374}

1986/06/02 The Multi-Purpose Cleaners That Do It All (NACD Only){0645}

1986/06/02 More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}

1986/06/02 New "Two Inch" Gauges, Indicator And Senders Available{7450}

1986/06/02 New Coupling Removal Tools For XT Hose{0618}

1986/06/02 7N129 Or 9S2259 Voltage Regulator Can Not Be Adjusted For Voltage Output{1405,1410}

1986/06/02 Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}

1986/06/02 Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}

1986/06/02 New Electric Shutoff Groups With Manual Override Available{1259}

1986/06/02 New Paper Towels Available{0600}

1986/06/09 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}

1986/06/09 Hose Clamp Recommendations For ATAAC Engines{1058,1087}

1986/06/09 Cleaning Procedure For Air-To-Air Aftercooler On ATAAC Engines{1063}