Parking Brake Manual Release
Show/hide table
 |
|
Personal injury or death can result from a brake malfunction. Do not operate the machine if the brake was applied due to a malfunction of the oil system or the brake. Correct any problem before attempting to operate the machine. |
- Chock the wheels in order to prevent the machine from rolling when the parking brake is released.
- Connect the steering frame lock.
Show/hide table
Illustration 1 g02547816 Show/hide table
Illustration 2 g02566138 Access to this location is made from beneath the machine - Remove four bolts (1) from the storage holes in the cover. There are two bolts on each side of the drive shaft.
- Install the four bolts in forcing holes (2). Tighten the bolts until an opposing force is felt.
- Before the machine is operated again, remove the bolts from the forcing holes and install the bolts in the storage holes.
Caterpillar Information System:
994H Wheel Loader Equipment Lowering with Engine Stopped
994H Wheel Loader Stopping the Engine if an Electrical Malfunction Occurs
994H Wheel Loader Backup Alarm
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 2448 - FMI 09
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 2448 - FMI 02
994H Wheel Loader Engine Starting with Auxiliary Start Receptacle - If Equipped
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 0890 - FMI 09
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 0800 - FMI 11
992K Wheel Loader Leaving the Machine
854K Wheel Dozer and 992K Wheel Loader Power Train Transmission Planetary - Assemble
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 0596 - FMI 14
994H Large Wheel Loader VIMSTM 3G / Product Link MID 161 - CID 0596 - FMI 09
Cat® Grade Control for Wheel Tractor Scrapers End User License Agreement
Custom Product Support Literature for 972K Wheel Loaders That Are Equipped with the 348-6588 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 972K Wheel Loaders That Are Equipped with the 348-6588 Steel Mill Arrangement {0374, 7000}
994H Wheel Loader Electrohydraulic System Hydraulic System Troubleshooting
627H Wheel Tractor-Scraper Power Train Electronic Control System - Scraper Neutral Start Function
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install - Tractor
994H Wheel Loader Battery - Clean
994H Large Wheel Loader VIMSTM 3G / Product Link Power Supply Circuit of Electronic Control Module
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
627H Wheel Tractor-Scraper Open Crankcase Ventilation (OCV) Fumes Disposal Filter - Replace - If Equipped
623H Wheel Tractor-Scraper Retarding
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
994H Wheel Loader Monitoring System