New Power Train Software is Now Used {7620}
- Wheel Loader:
- 988H (S/N: BXY1-1483,1900-2920,2921-UP)
Description of Change: New software is now used for the above listed machines.
Adaptable To: The new 341-8671 Power Train Software Gp contains the following improvements:
- The calibration of the impeller clutch has been updated in order to address occurrences of low maximum pressure on the impeller clutch.
- The results of the calibration for the impeller clutch are now available to be viewed in ET. The results will be displayed on the "Clutch Calibration" or the "Misc Group #1" status screens.
- The range of travel of the torque converter pedal beyond the calibrated limits has been increased in order to reduce the occurrence of "Data valid but above normal operational range" and "Data valid but below normal operational range" diagnostic codes.
Show/hide table
| Effectivity of the New 341-8671 Power Train Software Gp | ||
| Model | Adaptable Serial Numbers | Effective Serial Numbers |
| 988H | S/N:BXY1-1483 S/N:BXY1900-2920 |
S/N:BXY2921-UP |
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/06/08 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494} Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Rework Procedure To Update the Radiator Group{1353, 7251} Rework Procedure To Update the Radiator Group{1353, 7251}
C15 and C18 Tier 4 Final Engines General Information
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C7.1 Industrial Engine Fuel Manifold (ARD) - Aftertreatment Regeneration Device
973D Track-Type Loader Hydraulic System Lift Cylinder
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
2009/08/17 A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
2009/07/06 An Improved Friction Disc for the Torque Converter Impeller Clutch on 988G Wheel Loaders {3101, 3102}
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}
973D Track-Type Loader Hydraulic System Lift Cylinder
973D Track-Type Loader Hydraulic System Tilt Cylinder
D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary
2009/06/15 Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
Undersized Front Track Roller Frame Bearing{4151} Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
D7R Series II Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace