Transmission Planetary
Show/hide table
Illustration 1 | g02942437 |
Show/hide table
Specification for 186-2522 Transmission Planetary Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 6V-8197 Bolt     | Torque to 120 ± 20 N·m (89 ± 15 lb ft).     |
2     | 15     | 294-0877 Special Bolt     | Torque to 120 ± 20 N·m (89 ± 15 lb ft).     |
3     | 1     | 8T-0106 Bolt     | Torque to 120 ± 20 N·m (89 ± 15 lb ft).     |
4     | Thickness of five new friction discs and five new plates is 40.525 ± 1.175 mm (1.5955 ± 0.0463 inch):     |
||
5 | 6Y-5352 Friction Disc     | Thickness of one new friction disc is 4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).     |
|
5 | 7G-0437 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
5     | Thickness of five new friction discs and five new plates is 40.525 ± 1.175 mm (1.5955 ± 0.0463 inch):     |
||
5 | 6Y-5352 Friction Disc     | Thickness of one new friction disc is 4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).     |
|
5 | 7G-0437 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
6     | Thickness of three new friction discs and three new plates is 24.315 ± 0.705 mm (0.9573 ± 0.0278 inch):     |
||
3 | 6Y-5352 Friction Disc     | Thickness of one new friction disc is 4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).     |
|
3 | 7G-0437 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
7     | Thickness of two new friction discs and two new plates is 16.21 ± 0.47 mm (0.638 ± 0.019 inch):     |
||
2 | 6Y-5352 Friction Disc     | Thickness of one new friction disc is 4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).     |
|
2 | 7G-0437 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
8     | Thickness of five new friction discs and four new plates is 37.47 ± 0.92 mm (1.475 19 ± 0.036 inch):     |
||
5 | 3T-9960 Friction Disc     | Thickness of one new friction disc is 4.95 ± 0.08 mm (0.195 ± 0.003 inch).     |
|
4 | 6P-7968 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
9     | Thickness of four new friction discs and five new plates is 35.60 ± 1.07 mm (1.402 ± 0.042 inch):     |
||
4 | 6Y-5352 Friction Disc     | Thickness of one new friction disc is 4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).     |
|
5 | 7G-0437 Plate     | Thickness of one new plate is 3.18 ± 0.13 mm (0.125 ± 0.005 inch).     |
|
10     | 1     | 6V-5696 Bolt     | Torque to 120 ± 20 N·m (89 ± 15 lb ft).     |
11     | 4     | 6V-4248 Bolt     | Torque to 70 ± 15 N·m (52 ± 11 lb ft).     |
12     | 4     | 3T-7584 Spring     | Length under test force is 94.96 mm (3.739 inch). Test force is 154.40 ± 12.35 N (34.71 ± 2.78 lb). Free length after test is 124.4 mm (4.90 inch).     |
13     | 8     | 363-4541 Spring     | Length under test force is 37.82 mm (1.489 inch). Test force is 93.6 ± 5.6 N (21.1 ± 1.3 lb). Free length after test is 46.90 mm (1.846 inch).     |
14     | 4     | 9G-5828 Spring     | Length under test force is 45.7 mm (1.79921 inch). Test force is 150.5 ± 12.0 N (33.8 ± 2.7 lb). Free length after test is 62.0 mm (2.44 inch).     |
15     | 5     | 7G-5675 Seal Ring     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
16     | 1     | 7G-5730 Seal Ring     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
17     | 1     | 6P-7772 Seal Ring     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
18     | 5     | 6P-7773 Seal Ring     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
Caterpillar Information System:
D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
973D Track-Type Loader Hydraulic System Tilt Cylinder
973D Track-Type Loader Hydraulic System Lift Cylinder
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}
2009/07/06 An Improved Friction Disc for the Torque Converter Impeller Clutch on 988G Wheel Loaders {3101, 3102}
2009/06/08 New Power Train Software is Now Used {7620}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/06/08 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494} Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Rework Procedure To Update the Radiator Group{1353, 7251} Rework Procedure To Update the Radiator Group{1353, 7251}
C15 and C18 Tier 4 Final Engines General Information
2009/06/15 Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
Undersized Front Track Roller Frame Bearing{4151} Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
D7R Series II Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
973D Track-Type Loader Hydraulic System Tilt Cylinder
973D Track-Type Loader Hydraulic System Multi-Purpose Bucket Cylinder
973D Track-Type Loader Hydraulic System Ripper Cylinder
2009/06/15 New Improved Engine Software for 623G/627G Wheel Tractor-Scrapers {1901, 1902}
973D Track-Type Loader Hydraulic System Ripper Cylinder Mounting Group
973D Track-Type Loader Hydraulic System Bucket Control Group