Lift Cylinder
Show/hide table
Illustration 1 | g06271758 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 265-9683 Wear Ring | Bore before assembly is |
2 | 1 | 170-9844 Buffer Seal | Lubricate the sealing lip lightly with fluid that is being sealed. |
3 | 1 | 355-5820 U-Cup Seal | Lubricate the sealing lip lightly with fluid that is being sealed. |
4 | 1 | 233-0622 Wiper Seal | Lubricate the sealing lip lightly with fluid that is being sealed. |
5 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
6 | 1 | 1U-3848 Bushing | Bore before assembly is Installation depth is |
7 | 1 | 4J-8734 Locknut | Before assembly, lubricate the face and the threads.
Torque to |
8 | 1 | 393-7818 Head | Before assembly, lubricate the threads with clean grease.
Bore (C) over four lands is |
A | 1 | 290-7267 Hydraulic Cylinder | Bore is |
B | 1 | 290-6617 Rod As | Diameter is |
Caterpillar Information System:
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}
2009/07/06 An Improved Friction Disc for the Torque Converter Impeller Clutch on 988G Wheel Loaders {3101, 3102}
2009/06/08 New Power Train Software is Now Used {7620}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/06/08 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494} Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Rework Procedure To Update the Radiator Group{1353, 7251} Rework Procedure To Update the Radiator Group{1353, 7251}
C15 and C18 Tier 4 Final Engines General Information
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C7.1 Industrial Engine Fuel Manifold (ARD) - Aftertreatment Regeneration Device
973D Track-Type Loader Hydraulic System Lift Cylinder
973D Track-Type Loader Hydraulic System Tilt Cylinder
D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary
2009/06/15 Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
Undersized Front Track Roller Frame Bearing{4151} Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
D7R Series II Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
973D Track-Type Loader Hydraulic System Tilt Cylinder
973D Track-Type Loader Hydraulic System Multi-Purpose Bucket Cylinder
973D Track-Type Loader Hydraulic System Ripper Cylinder