Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
- Wheel Loader:
- 993K (S/N: LWA1-UP; Z9K1-UP)
ReferenceDisassembly and Assembly, KENR5817, "993K Wheel Loader Power Train"
Description of Change: New hardware and software have been developed in order to improve the life of the impeller clutch on the torque converter for 993K Wheel Loaders. The new hardware and software will prevent premature clutch failure due to high loads and temperatures.
Adaptable To:
Show/hide table
Required Parts (1)     | |||||
---|---|---|---|---|---|
Original Part Number     | Item     | New Part Number     | Item     | Required Before Failure     | Required After Failure     |
155-6189     | Housing As     | 326-1354     | Housing As     | X     | X     |
123-5255     | Clutch Piston     | 326-1356     | Piston     | X     | X     |
7S-6892     | Seal Ring     | 7S-6892     | Seal Ring     | X     | X     |
122-9978     | Seal Ring     | 1S-6478     | Seal Ring     | X     | X     |
6I-8597     | Friction Disc     | 324-9127     | Friction Disc     | X     | X     |
6Y-7198     | Plate     | 6Y-7198     | Plate     | X     | X     |
254-1474     | Power Train Software Gp     | 333-9625     | Power Train Software Gp     | X     | X     |
132-8876     | Oil Filter Element As     | 132-8876     | Oil Filter Element As     |     | X     |
104-1817     | Oil Cooler Core As     | 104-1817 (1)     | Oil Cooler Core As     |     | X     |
Show/hide table
( 1 ) | A remanufactured oil cooler assembly is available. Part number 10R-8649 |
The new hardware and software are adaptable to the following machines:
- 993K (S/N: LWA1-429; Z9K1-322)
- 993K (S/N: LWA430-UP; Z9K323-UP)
Caterpillar Information System:
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary
D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
973D Track-Type Loader Hydraulic System Tilt Cylinder
973D Track-Type Loader Hydraulic System Lift Cylinder
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}
2009/07/06 An Improved Friction Disc for the Torque Converter Impeller Clutch on 988G Wheel Loaders {3101, 3102}
2009/06/08 New Power Train Software is Now Used {7620}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/06/08 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494} Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Rework Procedure To Update the Radiator Group{1353, 7251} Rework Procedure To Update the Radiator Group{1353, 7251}
Undersized Front Track Roller Frame Bearing{4151} Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
D7R Series II Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
973D Track-Type Loader Hydraulic System Tilt Cylinder
973D Track-Type Loader Hydraulic System Multi-Purpose Bucket Cylinder
973D Track-Type Loader Hydraulic System Ripper Cylinder
2009/06/15 New Improved Engine Software for 623G/627G Wheel Tractor-Scrapers {1901, 1902}
973D Track-Type Loader Hydraulic System Ripper Cylinder Mounting Group
973D Track-Type Loader Hydraulic System Bucket Control Group
C15 and C18 Tier 4 Final Engines Basic Engine