Engine Oil Pump - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-2320 | 组合式拉拔器 | 1 |
| 8B-7560 | 踏脚板 | 1 | |
| B | 1P-0529 | 手柄 | 1 |
| 1P-0468 | 驱动板 | 1 | |
| 1P-0465 | 驱动板 | 1 | |
| C | 1P-0462 | 驱动板 | 1 |
| 1P-0461 | 驱动板 | 1 | |
| 1P-0529 | 手柄 | 1 | |
开始:
- 拆卸发动机机油泵。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下螺栓 (2) 、锁紧螺母 (1) 和吸油喇叭口 (3) 。
Show/hide table
 | |
| 图 1 | g01939556 |
- 拆卸惰齿轮 (4) 。
Show/hide table
 | |
| 图 2 | g01939557 |
- 使用工具 (B) 将轴承从怠速齿轮 (4) 内卸下。
- 从驱动齿轮 (5) 上卸下螺栓 (7) 和垫圈 (6) 。
- 使用工具 (A) 从轴上卸下驱动齿轮 (5) 。
- 从泵体 (8) 上卸下螺栓 (16) 、螺栓 (12) 、盖 (11) 和O型密封圈 (15) 。
Show/hide table
 | |
| 图 3 | g01939558 |
- 从泵体 (8) 上卸下轴组件 (9) 和轴组件 (10) 。
- 卸下螺栓 (14) 和压力安全阀 (13) 。
- 从盖 (11) 拆下轴承 (17) 。
Show/hide table
 | |
| 图 4 | g01940293 |
- 使用工具 (C) 从泵体 (8) 上卸下轴承 (18) 。
Show/hide table
 | |
| 图 5 | g01940294 |
Caterpillar Information System:
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
2009/08/17 A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
973D Track-Type Loader Power Train Pivot Bar
2009/06/15 Selection of Wire Rope and Use for PACCAR Winches {5163}
2009/07/20 An Improved Oil Supply Line for the Turbocharger Is Used on Some Track-Type Tractors {1052, 1307}
D6T Track-Type Tractor Hydraulic System Piston Motor (Fan Drive)
2009/06/08 An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310}
D6T Track-Type Tractor Hydraulic System Piston Pump (Fan Drive)
D8T Track-Type Tractor Battery - Inspect
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190} Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
973D Track-Type Loader Hydraulic System Hydraulic Manifold (Bank Valve Outlet)
973D Track-Type Loader Hydraulic System Hydraulic Manifold (Bank Valve Inlet)
973D Track-Type Loader Hydraulic System Lift Cylinder
C7.1 Industrial Engine Fuel Manifold (ARD) - Aftertreatment Regeneration Device
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C15 and C18 Tier 4 Final Engines General Information
Rework Procedure To Update the Radiator Group{1353, 7251} Rework Procedure To Update the Radiator Group{1353, 7251}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494} Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
2009/06/08 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/06/08 New Power Train Software is Now Used {7620}
2009/07/06 An Improved Friction Disc for the Torque Converter Impeller Clutch on 988G Wheel Loaders {3101, 3102}
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}