Tilt Control Valve (Dual) - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to tilt control valve (3). The weight of tilt control valve (3) is approximately 30 kg (65 lb). Use Tooling (A) and the suitable lifting device in order to position tilt control valve (3) .
Show/hide table
 | |
| Illustration 1 | g01479174 |
- Install three bolts (7) (not shown).
- Connect tube assemblies (6) to tilt control valve (3) .
Show/hide table
 | |
| Illustration 2 | g01479112 |
- Connect harness assembly (5) .
- Connect hose assemblies (4) to tilt control valve (3) .
- Install cover assembly (2) to the left side of the front frame.
Show/hide table
 | |
| Illustration 3 | g01479072 |
- Close access door (1) on the top of the front frame.
Show/hide table
 | |
| Illustration 4 | g01470340 |
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
End By: Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
854K Wheel Dozer Hydraulic System System Pressure - Release
Installation of the Ladder On the D11R and D11T Track-Type Tractor {7254} Installation of the Ladder On the D11R and D11T Track-Type Tractor {7254}
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
D6N Track-Type Tractor Hydraulic System Oil Sample - Obtain
854K Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Remove
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
613G Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
904H Compact Wheel Loader Power Train Hydrostatic System - Flush and Fill
D6N Track-Type Tractor Hydraulic System Oil Filter - Replace
992K Wheel Loader and 854K Wheel Dozer Power Train Features
992K Wheel Loader and 854K Wheel Dozer Power Train Data Link
D6N Track-Type Tractor Ripper Linkage and Cylinder Bearings - Lubricate
854K Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Disassemble
993K Wheel Loader Power Train Transmission Oil Pump - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Electronic Control Module
854K Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Assemble
D6N Track-Type Tractor Steering Charge Filter - Replace
D6N Track-Type Tractor Track - Check/Adjust
D6N Track-Type Tractor Transmission Oil Filter - Replace
Some 3500 Cylinder Packs May Have Incorrect Pistons{1225} Some 3500 Cylinder Packs May Have Incorrect Pistons{1225}
D6N Track-Type Tractor Transmission Oil Level - Check