Pump Drive (Rear) from Engine - Separate
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9200 | Lever Puller Hoist | 1 |
B | 138-7575 | Link Bracket | 1 |
Start By:
- Remove the engine and the rear pump drive. Refer to Disassembly and Assembly , "Engine and Pump Drive (Rear) - Remove".
- Attach Tooling (A), Tooling (B), and a suitable lifting device to torque converter (2). The weight of torque converter (2) is approximately
1134 kg (2500 lb) . Remove bolts (2). Remove torque converter (2).Show/hide tableIllustration 2 g01446695 - Attach a suitable lifting device to bracket (4). The weight of bracket (4) is approximately
63 kg (140 lb) . Remove bolts (3) and bracket (4). Repeat for the other side.Show/hide tableIllustration 3 g01446731 - Attach a suitable lifting device to pump drive (5) and the attached pumps. The weight of pump drive (5) and the attached pumps is approximately
1610 kg (3550 lb) . Remove bolts (6). Remove pump drive (5) and the attached pumps.
Show/hide table
Illustration 1 | g01446693 |
Caterpillar Information System:
993K Wheel Loader Electrohydraulic System Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Remove
993K Wheel Loader Engine Supplement Engine - Remove
AD55B Underground Articulated Truck C27 Engine Supplement Bottom Guard (Engine) - Remove and Install
AD55B Underground Articulated Truck Power Train Drive Shaft (Upper) - Remove and Install
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Assemble
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Disassemble
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Install
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Remove
854K Wheel Dozer Service Brake Wear Indicator - Check
2008/01/21 New O-Ring Seal and an Improved Cover for the Diverter Valve {5066, 5304}
992K Wheel Loader and 854K Wheel Dozer Power Train Oscillating Axle (Rear) - Install
992K Wheel Loader and 854K Wheel Dozer Steering System Gear Pump (Steering Oil Cooler) (Steering Pilot)
2007/12/31 A New Calibration Procedure is Now Available {4269}
2008/01/28 New Driveline Components Improve Service Life of Wheel Loaders {3253, 3267}
992K Wheel Loader and 854K Wheel Dozer Braking System Brake System Troubleshooting
2008/02/11 The Improved Software for the Autolube {7540, 7610, 7620}
994F Wheel Loader Pump Drive (Rear) to Engine - Connect
993K Wheel Loader Electrohydraulic System Pump Performance (Implement) (Lift Time) - Test
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Install
Failed Relays are Reported in the Secondary Steering System{4493, 7620} Failed Relays are Reported in the Secondary Steering System{4493, 7620}
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Disassemble
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Assemble
993K Wheel Loader Power Train Torque Converter Stall (3FWD) - Test