New O-Ring Seal and an Improved Cover for the Diverter Valve {5066, 5304}
- Wheel Tractor-Scraper:
- 613CSeries II (S/N: 8LJ1-UP; TJK1-UP; LCZ1-UP)
- 613C (S/N: 92X1-UP; 93X1-UP)
- 613G (S/N: ESB1-UP; DBE1-UP)
Description of Change: The diverter valve is now using a new O-Ring seal and an improved cover on certain Wheel Tractor-Scrapers. The new O-Ring seal and the improved cover will improve the life of the diverter valve.
Adaptable To: The new O-Ring seal and the improved cover is adaptable to the following machines:
- 613C Series II (S/N: 8LJ1-3375; TJK1-UP; LCZ1-UP)
- 613C (S/N: 92X1-UP; 93X1-5157)
- 613G (S/N: ESB1-107; DBE1-101)
- 613C Series II (S/N: 8LJ3376-UP)
- 613C (S/N: 93X5158-UP)
- 613G (S/N: ESB108-UP; DBE102-UP)
Show/hide table
Required parts     | |||
Item     | Qty     | Part Number     | Description     |
1     | 2     | 3E-6771     | O-Ring Seal     |
2     | 1     | 1U-2119     | Cover     |
3     | 1     | 1U-2120     | Cover     |
Show/hide table
Illustration 1 | g01446849 |
(1) O-Ring seal (2) Cover |
Show/hide table
Illustration 2 | g01446850 |
(1) O-Ring seal (3) Cover |
The O-Ring groove in the 1U-2119 Cover (2) and the 1U-2120 Cover (3) is now shallower in order to provide greater force on the O-Ring. Install the new O-Ring seals (1) into the O-Ring groove on the new covers (2) and (3). Replace the former covers with the new covers (2) and (3).
Caterpillar Information System:
992K Wheel Loader and 854K Wheel Dozer Power Train Oscillating Axle (Rear) - Install
992K Wheel Loader and 854K Wheel Dozer Steering System High Pressure Screen Group (Deluxe Filtration)
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0590 - FMI 09
2008/01/07 Rubber Pads on the Stops for the Steering Have Been Improved {4304, 7188}
993K Wheel Loader Engine Supplement Alternator - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0585 - FMI 08
993K Wheel Loader Power Train Wheel Bearings - Adjust
992K Wheel Loader and 854K Wheel Dozer Power Train Location of Power Train Components
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0444 - FMI 06
993K Wheel Loader Electrohydraulic System Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
854K Wheel Dozer Service Brake Wear Indicator - Check
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Remove
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Install
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Disassemble
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Assemble
AD55B Underground Articulated Truck Power Train Drive Shaft (Upper) - Remove and Install
AD55B Underground Articulated Truck C27 Engine Supplement Bottom Guard (Engine) - Remove and Install
993K Wheel Loader Engine Supplement Engine - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Remove
993K Wheel Loader Electrohydraulic System Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
994F Wheel Loader Pump Drive (Rear) from Engine - Separate
992K Wheel Loader and 854K Wheel Dozer Steering System Gear Pump (Steering Oil Cooler) (Steering Pilot)