Drive Shaft (Upper) - Remove and Install
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Remove the two bolts and guard (2). Remove four bolts (3) and guard (1).
Show/hide table
Illustration 2 g01446482 - Remove the two bolts and guard (6). Remove four bolts (5) and guard (4).
Show/hide table
Illustration 3 g01446484 - Attach a suitable lifting device to upper drive shaft (8). The weight of upper drive shaft (8) is approximately
24 kg (53 lb) . - Remove eight bolts (7).
- Remove upper drive shaft (8).
Show/hide table
Illustration 1 | g01446475 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 169-5464 | Quick Cure Primer | 1 |
B | 155-0695 | Thread Lock Compound | 1 |
- Attach a suitable lifting device to upper drive shaft (8). The weight of upper drive shaft (8) is approximately
24 kg (53 lb) . - Apply Tooling (A) and then apply Tooling (B) to the threads of bolts (7).
- Install upper drive shaft (8).
- Install eight bolts (7). Tighten eight bolts (7) to a torque of
135 ± 6.5 N·m (100 ± 5 lb ft) . - Lubricate the upper drive shaft. Refer to Operation and Maintenance Manual, "Drive Shaft Universal Joints, Splines, and Bearings - Inspect/Lubricate".
Show/hide table
Illustration 5 g01446482 - Install guard (4) and four bolts (5). Install guard (6) and the two bolts.
Show/hide table
Illustration 6 g01446475 - Install guard (1) and four bolts (3). Install guard (2) and the two bolts.
Show/hide table
Illustration 4 | g01446484 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Assemble
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Disassemble
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Install
992K Wheel Loader Machine Systems Control Valve (Tilt Regeneration) - Remove
854K Wheel Dozer Service Brake Wear Indicator - Check
2008/01/21 New O-Ring Seal and an Improved Cover for the Diverter Valve {5066, 5304}
992K Wheel Loader and 854K Wheel Dozer Power Train Oscillating Axle (Rear) - Install
992K Wheel Loader and 854K Wheel Dozer Steering System High Pressure Screen Group (Deluxe Filtration)
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0590 - FMI 09
2008/01/07 Rubber Pads on the Stops for the Steering Have Been Improved {4304, 7188}
993K Wheel Loader Engine Supplement Alternator - Remove and Install
AD55B Underground Articulated Truck C27 Engine Supplement Bottom Guard (Engine) - Remove and Install
993K Wheel Loader Engine Supplement Engine - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Trunnion Support (Oscillating Axle, Front) - Remove
993K Wheel Loader Electrohydraulic System Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
994F Wheel Loader Pump Drive (Rear) from Engine - Separate
992K Wheel Loader and 854K Wheel Dozer Steering System Gear Pump (Steering Oil Cooler) (Steering Pilot)
2007/12/31 A New Calibration Procedure is Now Available {4269}
2008/01/28 New Driveline Components Improve Service Life of Wheel Loaders {3253, 3267}
992K Wheel Loader and 854K Wheel Dozer Braking System Brake System Troubleshooting
2008/02/11 The Improved Software for the Autolube {7540, 7610, 7620}
994F Wheel Loader Pump Drive (Rear) to Engine - Connect
993K Wheel Loader Electrohydraulic System Pump Performance (Implement) (Lift Time) - Test