The Orientation of the Right Hand Steering Hoses have been Improved {4304}
- Wheel Loader:
- 980GSeries II (S/N: AWH1-UP)
- 980H (S/N: JMS1-UP)
Description of Change: The orientation of the hoses for the right hand steering cylinder has been improved. This new orientation will help improve the service life of the hoses.
Adaptable To: Refer to the machines that are listed above. Make sure that the 116-9576 Hose Assembly and the 116-9577 Hose assembly are parallel. This is shown in illustration 1.
Show/hide table
 | |
| Illustration 1 | g01445370 |
Area above the right steering cylinder (1) 116-9577 Hose assembly (2) 116-9576 Hose assembly | |
The change is adaptable with the following wheel loaders.
- JMS1-3149
- AWH1-UP
- 980H (S/N: JMS3150-UP)
Caterpillar Information System:
854K Wheel Dozer Hydraulic System Features - VIMS
938H Wheel Loader and IT38H Integrated Toolcarrier Machine Systems Toggle Switch (Hood Tilt)
992K Wheel Loader Machine Systems Main Control Valve - Disassemble
993K Wheel Loader Power Train Using the Operator Monitor to Determine Diagnostic Codes
993K Wheel Loader Electrohydraulic System MID 082 - CID 0595 - FMI 03
993K Wheel Loader Electrohydraulic System Service Tools
993K Wheel Loader Electrohydraulic System MID 082 - CID 0595 - FMI 13
993K Wheel Loader Electrohydraulic System MID 082 - CID 0800 - FMI 09
993K Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage) - Replace
993K Wheel Loader Electrohydraulic System MID 082 - CID 0353 - FMI 04
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
2008/01/07 Rework Procedure For The Fender and Fender Bracket {7252}
2008/02/11 Transmission and Engine Software Update for Certain Medium Wheel Loaders {1901, 1902, 7610, 7620}
844H Wheel Dozer Additional Messages
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor System Pressure Release
Accugrade® Grade Control System - CD700 Guidance to Dynamic Layered Lift Alignments
993K Wheel Loader Electrohydraulic System Pump Performance (Hydraulic Fan) - Test
993K Wheel Loader Electrohydraulic System Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
2008/03/31 New Lift Cylinder Assemblies Are Available For Certain Large Wheel Loaders {5102}
992K Wheel Loader and 854K Wheel Dozer Power Train Oscillating Axle (Rear) - Remove
993K Wheel Loader Power Train Input Transfer Gears - Adjust
2007/12/31 Gaskets Are Now Used Around the Fuel Level Sender Assembly {7481}
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0348 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0348 - FMI 04