C13, C15, and C18 Generator Set Engines Caterpillar


Vibration Damper and Pulley

Usage:

C15 AR2



图 1g01886893

(1) 组装之前,先用二硫化钼或石墨基润滑剂对螺栓的螺纹进行润滑。

(2) 拔梢锁紧双头螺柱的扭矩 ... 65 ± 10 N·m (48 ± 7 lb ft)

(3) 全螺纹螺母的扭矩 ... 135 ± 20 N·m (100 ± 15 lb ft)

Caterpillar Information System:

C13, C15, and C18 Generator Set Engines Vibration Damper and Pulley
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Event Code List
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Diagnostic Trouble Code List
G3500 A3 Engines Detonation Sensor
AccuGrade® GPS (CD700) Electrical Connector - Inspect
C15 and C18 Engines for Caterpillar Built Machines E363 High Fuel Supply Temperature
G3500 A3 Engines Electrical Power Supply
CX31 On-Highway Transmission Retarder - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Electronic Control Unit
TH31-E61 and TH35-E81 Petroleum Transmissions Plate Locations and Film Locations
2006/03/27 New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
Installation of Speed Sensor Group{1907} Installation of Speed Sensor Group{1907}
Caterpillar On-Highway Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
AccuGrade® GPS (CD700) Light Bar - Configure
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Shifting Function
ADEM 3 Conversion for G3500 Engines{1000, 1901} ADEM 3 Conversion for G3500 Engines{1000, 1901}
AccuGrade® GPS (CD700) Machine Dimensions - Configure
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Data Link
G3500 A3 Engines Measuring Inlet Manifold Temperature
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control - Shift Pad
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0041 - FMI 03
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0041 - FMI 04
C11 and C13 Petroleum Engines Diagnostic Flash Code Retrieval
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1401 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.