Diagnostic Trouble Code List
Use the instrument cluster or use the Caterpillar Electronic Technician in order to determine the diagnostic trouble codes for the Transmission ECU. After determining the diagnostic trouble codes, refer to the corresponding test procedure for more information. Perform the procedure that corresponds to the diagnostic trouble code (CID and FMI). The following table is a list of possible diagnostic trouble codes for the ECU.
TH31 and TH35 Transmission
Show/hide table
Diagnostic Trouble Codes For The TH31 and TH35 Transmission (1)     | |
---|---|
For troubleshooting, see the procedure with the same CID and FMI.     | |
CID / FMI     | Description     |
CID 0041 8 Volt DC Supply:     | |
FMI 03     | Voltage above normal or shorted high..     |
FMI 04     | Voltage below normal or shorted low.     |
CID 0144 Backup Alarm Relay:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or open circuit.     |
FMI 06     | Current above normal or grounded circuit.     |
CID 0168 Electrical System Voltage:     | |
FMI 01     | Data valid but below normal operational range.     |
CID 0177 Transmission Oil Temperature Sensor:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 04     | Voltage below normal or shorted low.     |
CID 0190 Speed Sensor (Engine):     | |
FMI 02     | Data erratic, intermittent, or incorrect.     |
FMI 08     | Abnormal frequency, pulse width, or period.     |
CID 0247 J1939 Data Link:     | |
FMI 09     | Abnormal update.     |
CID 0248 Cat Data Link:     | |
FMI 09     | Abnormal update.     |
CID 0444 Starter Motor Relay:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or open circuit.     |
FMI 06     | Current above normal or grounded circuit.     |
CID 0585 Transmission Output Speed Sensor 1:     | |
FMI 02     | Data erratic, intermittent, or incorrect.     |
FMI 08     | Abnormal frequency, pulse width, or period.     |
CID 0672 Torque Converter Output Speed Sensor:     | |
FMI 02     | Data erratic, intermittent, or incorrect.     |
FMI 08     | Abnormal frequency, pulse width, or period.     |
CID 0673 Transmission Output Speed Sensor 2:     | |
FMI 02     | Data erratic, intermittent, or incorrect.     |
FMI 08     | Abnormal frequency, pulse width, or period.     |
CID 0702 Transmission Gear Lever Selector Sensor (Switch):     | |
FMI 05     | Current below normal.     |
FMI 06     | Current above normal.     |
FMI 08     | Abnormal frequency, pulse width, or period.     |
CID 0709 Transmission Lockup Clutch Solenoid:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal.     |
FMI 06     | Current above normal.     |
FMI 11     | Failure mode not identifiable.     |
CID 0826 Torque Converter Oil Temperature Sensor:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 04     | Voltage below normal or shorted low.     |
CID 1326 ECM Location Code:     | |
FMI 02     | Data erratic, intermittent, or incorrect.     |
CID 1401 Transmission Solenoid 1:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1402 Transmission Solenoid 2:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1403 Transmission Solenoid 3:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1404 Transmission Solenoid 4:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1405 Transmission Solenoid 5:     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1406 Transmission Solenoid 6 (For TH35 Only):     | |
FMI 03     | Voltage above normal or shorted high.     |
FMI 05     | Current below normal or shorted low.     |
FMI 06     | Current above normal or open circuit.     |
FMI 11     | Failure mode not identifiable.     |
CID 1823 Shift Rail #1 Position Sensor     | |
FMI 03     | Voltage above normal     |
FMI 04     | Voltage below normal     |
CID 1824 Shift Rail #2 Position Sensor     | |
FMI 03     | Voltage above normal     |
FMI 04     | Voltage below normal     |
CID 1825 Shift Rail #3 Position Sensor     | |
FMI 03     | Voltage above normal     |
FMI 04     | Voltage below normal     |
CID 2859 Transmission Dropbox Disconnect #1 Engage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
CID 2860 Transmission Dropbox Disconnect #2 Engage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
CID 2861 Transmission Dropbox Disconnect #3 Engage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
CID 2862 Transmission Dropbox Disconnect #1 Disengage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
CID 2863 Transmission Dropbox Disconnect #2 Disengage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
CID 2864 Transmission Dropbox Disconnect #3 Disengage     | |
FMI 03     | Voltage above normal     |
FMI 05     | Current below normal or open circuit     |
FMI 06     | Current above normal or grounded circuit     |
Show/hide table
( 1 ) | For the Transmission ECU, the MID is 027. This table pertains to diagnostic trouble codes with a MID of 027. |
Caterpillar Information System:
G3500 A3 Engines Detonation Sensor
AccuGrade® GPS (CD700) Electrical Connector - Inspect
C15 and C18 Engines for Caterpillar Built Machines E363 High Fuel Supply Temperature
G3500 A3 Engines Electrical Power Supply
CX31 On-Highway Transmission Retarder - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Electronic Control Unit
TH31-E61 and TH35-E81 Petroleum Transmissions Plate Locations and Film Locations
2006/03/27 New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
Installation of Speed Sensor Group{1907} Installation of Speed Sensor Group{1907}
2006/03/06 A Piston Ring Compressor is Available for C175 Engines {0701, 0705, 1215}
2006/03/13 A New Piston and Rod Gp has been Released {1225}
CX31 On-Highway Transmission Transmission Oil Supply
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Event Code List
C13, C15, and C18 Generator Set Engines Vibration Damper and Pulley
C13, C15, and C18 Generator Set Engines Vibration Damper and Pulley
Caterpillar On-Highway Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
AccuGrade® GPS (CD700) Light Bar - Configure
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Shifting Function
ADEM 3 Conversion for G3500 Engines{1000, 1901} ADEM 3 Conversion for G3500 Engines{1000, 1901}
AccuGrade® GPS (CD700) Machine Dimensions - Configure
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Data Link
G3500 A3 Engines Measuring Inlet Manifold Temperature
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control - Shift Pad
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0041 - FMI 03