Spark Plug and Transformer
Show/hide table
Illustration 1 | g01237721 |
(1) Transformer assembly
(2) Seal
Lubricate the bore with clean engine oil.
(3) Extension assembly
(4) Seal
Lubricate the bore with clean engine oil.
(5) Spark plug
- Torque ... 68 ± 4 N·m (50 ± 3 lb ft)
- Spark plug gap ... 0.29 ± 0.04 mm (0.0114 ± 0.0016 inch)
Caterpillar Information System:
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3500 A3 Engines Electronic Service Tool Will Not Communicate with ECM
G3500 A3 Engines Symptoms
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
2006/02/01 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1290, 7569}
G3500 A3 Engines Replacing the ECM
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
2006/02/13 Test Harness Connects PC or Laptop Computer to Electronic Governor {0779, 0785, 1930, 7620}
G3500 A3 Engines Engine Starts but Stalls Immediately
C3.3 Industrial Engine Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201} Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
C3.3 Industrial Engine Engine Oil Pressure - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Assemble
C3.3 Industrial Engine Fuel Injection Nozzle - Test
C15 and C18 Generator Set Engines Engine Oil Cooler - Remove
3500 Spark Ignited Engines Magneto
C15 and C18 Generator Set Engines Engine Oil Cooler - Install
3126B and 3126E Truck Engines Air Compressor - Bendix Tu-Flo Air Compressors