Crankshaft Rear Seal and Wear Sleeve - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| E | 1U-7598 | Seal Installer Gp | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Replacement rear seals are supplied with a wear sleeve. This wear sleeve must be installed with the rear seal. New engines from the factory do not have a wear sleeve. Do not install the rear seal if any of the following conditions exist:
- The crankshaft rear seal has been separated from the wear sleeve.
- The rear seal group appears to be damaged.
- The crankshaft rear seal has been lubricated. The seal is designed to be installed dry.
- Ensure that the rear of the crankshaft is thoroughly clean and dry prior to the installation of the crankshaft rear seal.
- Use Tooling (E) in order to install crankshaft rear seal (1) .
Show/hide table
 | |
| Illustration 1 | g01237705 |
End By: Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Caterpillar Information System:
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3500 A3 Engines Electronic Service Tool Will Not Communicate with ECM
G3500 A3 Engines Symptoms
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
2006/02/01 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1290, 7569}
G3500 A3 Engines Replacing the ECM
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925} Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925}
3500 Spark Ignited Engines Spark Plug and Transformer
2006/02/13 Test Harness Connects PC or Laptop Computer to Electronic Governor {0779, 0785, 1930, 7620}
G3500 A3 Engines Engine Starts but Stalls Immediately
C3.3 Industrial Engine Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201} Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
C3.3 Industrial Engine Engine Oil Pressure - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Assemble
C3.3 Industrial Engine Fuel Injection Nozzle - Test
C15 and C18 Generator Set Engines Engine Oil Cooler - Remove
3500 Spark Ignited Engines Magneto
C15 and C18 Generator Set Engines Engine Oil Cooler - Install