C15 and C18 Generator Set Engines Caterpillar


Engine Oil Filter Base - Install

Usage:

C15 115

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01237660

  1. 将 O 形密封圈安装在发动机机油滤清器底座 (5) 上。

  1. 将发动机机油滤清器底座 (5) 安置在发动机机油冷却器上,并安装螺栓 (3) 、 (6) 和 (2) 。

  1. 连接管组件 (1) 。

  1. 安装发动机机油滤清器 (4) 。 请遵守发动机机油滤清器上有关正确安装步骤的说明。 请勿过分拧紧发动机机油滤清器。

  1. 向润滑系统中加注发动机油。 请参阅操作和保养手册, "加注容量",以了解发动机的润滑系统容量。

Caterpillar Information System:

3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3500 A3 Engines Electronic Service Tool Will Not Communicate with ECM
G3500 A3 Engines Symptoms
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
2006/02/01 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1290, 7569}
G3500 A3 Engines Replacing the ECM
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
3126B and 3126E Truck Engines Air Compressor - Midland Air Compressors
Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925} Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925}
C3.3 Industrial Engine Fuel Injector - Remove
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
3500 Spark Ignited Engines Spark Plug and Transformer
2006/02/13 Test Harness Connects PC or Laptop Computer to Electronic Governor {0779, 0785, 1930, 7620}
G3500 A3 Engines Engine Starts but Stalls Immediately
C3.3 Industrial Engine Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201} Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
C3.3 Industrial Engine Engine Oil Pressure - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Assemble
C3.3 Industrial Engine Fuel Injection Nozzle - Test
C15 and C18 Generator Set Engines Engine Oil Cooler - Remove
3500 Spark Ignited Engines Magneto
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.