Magneto
Show/hide table
Illustration 1 | g01237933 |
Typical example |
(1) Timing marks
(2) Index mark
(3) Interface connector
(4) Output connector
(5) Timing window
(6) Coupler
- With the engine at 25° BTC, ensure that the slots in the drive coupling are at the correct angle. Refer to Specifications, "Magneto Drive" for the correct angle.
- Turn the magneto shaft until index mark (2) in timing window (5) is at CW.
- Install the magneto onto the drive housing. Ensure that the tangs on coupler (6) engage correctly with the slots in the drive coupling.
- Install the bolts and the washers in order to hold the magneto in position.
- Check the timing at the No. 1 cylinder at rated speed. Rotate the magneto in order to adjust the timing.
- Total ignition timing must be 25° BTC at rated speed.
Caterpillar Information System:
C15 and C18 Generator Set Engines Engine Oil Cooler - Remove
C3.3 Industrial Engine Fuel Injection Nozzle - Test
C15 and C18 Generator Set Engines Engine Oil Filter Base - Assemble
C3.3 Industrial Engine Engine Oil Pressure - Test
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201} Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble
C3.3 Industrial Engine Engine Crankcase Pressure (Blowby) - Test
G3500 A3 Engines Engine Starts but Stalls Immediately
2006/02/13 Test Harness Connects PC or Laptop Computer to Electronic Governor {0779, 0785, 1930, 7620}
3500 Spark Ignited Engines Spark Plug and Transformer
C7 Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
C15 and C18 Generator Set Engines Engine Oil Cooler - Install
3126B and 3126E Truck Engines Air Compressor - Bendix Tu-Flo Air Compressors
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Data Link
G3500 A3 Engines Turbocharger Turbine Temperature (Low)
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Diagnostic Trouble Code List
C15 and C18 Generator Set Engines Engine Oil Pump - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 190 - FMI 8
3500 Engines Excessive Black Smoke
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 3
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 16
C15 and C18 Generator Set Engines Engine Oil Pump - Install