Fuel Filter Base - Install
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安置燃油滤清器底座 (9) 并安装螺栓 (5) 。
Show/hide table
图 1 | g01235150 |
- 连接软管组件 (1) 、 (6) 、 (7) 和 (8) 。
- 安装燃油滤清器 (10) 。 请遵守燃油滤清器上有关正确安装步骤的说明。 请勿过分拧紧燃油滤清器。
- 连接线束组件 (2) 、 (3) 和 (4) 。
- 将供油开关置于 "ON"(接通)位置。
- 排出系统中的空气。 请参阅测试与调整, "燃油系统 - 预注"。
Caterpillar Information System:
C15 and C18 Generator Set Engines Fuel Filter Base - Assemble
New Software for Cylinder Tests is Now Available{7620} New Software for Cylinder Tests is Now Available{7620}
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Aftercooler Core - Clean/Test
C15 and C18 Generator Set Engines Fuel Filter Base - Disassemble
C3.3 Industrial Engine Engine Oil Pump - Inspect
C3.3 Industrial Engine Valve Guide - Inspect
3512 Industrial Engine Fuel System Operation
C15 and C18 Generator Set Engines Fuel Filter Base - Remove
330B Excavator Machine System Specifications Front Idler
C6.6 Engines for Caterpillar Built Machines Starter Motor
2006/02/01 Responsibilities for Emission Certified Engines {1000}
3512B and 3512C Engines For Caterpillar Built Machines Electronic Control Module (ECM)
C11 and C13 Engines Engine Oil Pressure Sensor
2006/01/23 Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}
C280 Marine Propulsion Engines System Overview
Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
C15 and C18 Generator Set Engines Turbocharger - Remove
C15 and C18 Generator Set Engines Turbocharger - Install
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Inspect
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Test
C13T-TH35 and C15T-TH35 Petroleum Packages Oil Filter (Transmission) - Replace