Turbocharger - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 5P-3931     | 防粘结剂     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 涂抹在排气歧管上涡轮增压器的螺栓上。
- 涡轮增压器 (2) 的重量约为 34 kg (75 lb)。 安置密封垫 (8) 。 需要两个人来将涡轮增压器 (2) 安装在排气歧管上。
Show/hide table
图 1 | g01235667 |
- 安装螺母 (7) 。 拧紧螺母 (7) 至扭矩为 54 ± 5 N·m (40 ± 4 lb ft)。
注: 使用后请丢弃螺母。 安装时请使用新的螺母。
- 连接管组件 (5) 和 (6) 。
- 安置罩 (4) 并安装卡箍 (3) 。 安装卡箍 (1) 。
Caterpillar Information System:
C15 and C18 Generator Set Engines Turbocharger - Remove
Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
C280 Marine Propulsion Engines System Overview
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}
2006/01/23 Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
C11 and C13 Engines Engine Oil Pressure Sensor
C15 and C18 Generator Set Engines Fuel Filter Base - Install
C15 and C18 Generator Set Engines Fuel Filter Base - Assemble
New Software for Cylinder Tests is Now Available{7620} New Software for Cylinder Tests is Now Available{7620}
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Aftercooler Core - Clean/Test
C15 and C18 Generator Set Engines Fuel Filter Base - Disassemble
C3.3 Industrial Engine Engine Oil Pump - Inspect
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Inspect
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Test
C13T-TH35 and C15T-TH35 Petroleum Packages Oil Filter (Transmission) - Replace
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Compressor
3126B and 3126E Truck Engines Atmospheric Pressure Sensor - If Equipped
Salvage of Tapered Steering Bores {4301, 4305, 4310} Salvage of Tapered Steering Bores {4301, 4305, 4310}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Alternator - Charging Problem and/or Noisy Operation
Failures of Cylinder Head Valves on G3500C and G3500E Generator Set Engines{1100, 1105, 1121} Failures of Cylinder Head Valves on G3500C and G3500E Generator Set Engines{1100, 1105, 1121}
C3.3 Industrial Engine Piston Ring Groove - Inspect
C6.6 Engines for Caterpillar Built Machines Coolant Temperature Sensor