Fuel Filter Base - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 155-0695     | 螺纹锁固胶     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将 O 形密封圈安装在燃油旁通阀 (5) 上。 将燃油旁通阀 (5) 安装在燃油滤清器底座组件 (2) 上。 拧紧燃油旁通阀 (5) 至扭矩为 35 ± 3 N·m (26 ± 2 lb ft)。
Show/hide table
图 1 | g01242844 |
- 将 O 形密封圈安装在燃油单向阀 (1) 上。 将燃油单向阀 (1) 安装在燃油滤清器底座组件 (2) 上。 拧紧燃油单向阀 (1) 至扭矩为 35 ± 3 N·m (26 ± 2 lb ft)。
- 将 O 形密封圈安装在接头 (4) 和 (3) 上。 将接头安装在燃油滤清器底座组件 (2) 上。
- 如有必要,将空心螺柱 (6) 安装到燃油滤清器底座组件 (2) 上。 拧紧空心螺柱 (6) 至扭矩为 70 ± 15 N·m (52 ± 11 lb ft)。
注: 将工具 (A) 涂抹在拔梢锁紧双头螺栓基座端螺纹开始的 7.6 ± 0.8 mm (0.30 ± 0.03 in) 处。
End By:
- 安装燃油滤清器底座。 请参阅 拆解和组装, "燃油滤清器底座 - 安装"。
- 安装燃油压力传感器。 请参阅 拆解和组装, "燃油压力传感器 - 拆卸和安装"。
- 安装燃油温度传感器。 请参阅 拆解和组装, "燃油温度传感器 - 拆卸和安装"。
Caterpillar Information System:
New Software for Cylinder Tests is Now Available{7620} New Software for Cylinder Tests is Now Available{7620}
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Aftercooler Core - Clean/Test
C15 and C18 Generator Set Engines Fuel Filter Base - Disassemble
C3.3 Industrial Engine Engine Oil Pump - Inspect
C3.3 Industrial Engine Valve Guide - Inspect
3512 Industrial Engine Fuel System Operation
C15 and C18 Generator Set Engines Fuel Filter Base - Remove
330B Excavator Machine System Specifications Front Idler
C6.6 Engines for Caterpillar Built Machines Starter Motor
2006/02/01 Responsibilities for Emission Certified Engines {1000}
3512B and 3512C Engines For Caterpillar Built Machines Electronic Control Module (ECM)
C280 Marine Propulsion Engines Event Code List
C15 and C18 Generator Set Engines Fuel Filter Base - Install
C11 and C13 Engines Engine Oil Pressure Sensor
2006/01/23 Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}
C280 Marine Propulsion Engines System Overview
Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
C15 and C18 Generator Set Engines Turbocharger - Remove
C15 and C18 Generator Set Engines Turbocharger - Install
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Inspect
3126B and 3126E Truck Engines Boost Pressure Sensor
C3.3 Industrial Engine Cooling System - Test