Piston Pump (Winch)
Show/hide table
Illustration 1 | g01666173 |
Test at full speed:
- Maximum displacement of main pump ... 49 cc/rev (3 in3/rev)
- Maximum flow of main pump ... 98 L/min (26 US gpm)
- Maximum displacement of charge pump ... 11.2 cc/rev (0.68 in3/rev)
- Maximum flow of charge pump ... 22 L/min (5.8 US gpm)
- Maximum flow of main pump ... 98 L/min (26 US gpm)
The rotation of the pump is clockwise when the pump is viewed from the drive end.
(1) Pressure Override Relief Valve
- Relief setting ... 41000 ± 500 kPa (5950 ± 75 psi)
(2) Solenoids
- 24 V On/Off solenoid ... 500-1500 mA
(3) Crossover Relief Valve
- Relief setting ... 44000 ± 750 kPa (6380 ± 110 psi)
(4) Charge relief valve
- Relief setting ... 2500 ± 100 kPa (365 ± 15 psi)
Caterpillar Information System:
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
D6T Track-Type Tractor Systems Relief Valve (Main) - Standard
2006/11/27 New Exhaust Temperature Sensors Are Now Available {1919}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Connectors - Inspect
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Parking Brake
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Digital Throttle Position Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Air Inlet Heater Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
AD55B Underground Articulated Truck Machine Systems Gear Pump (Hoist, Brake, and Pilot) - Install
D6K Track-Type Tractor Machine Systems Gear Pump (Fan Drive) - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake and Planetary
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Disassemble
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Assemble
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
Field Installation of the Payload Control System{7494} Field Installation of the Payload Control System{7494}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
D6K Track-Type Tractor Electrohydraulic Power Train Crossover Relief Valve - Adjust
D6K Track-Type Tractor Electrohydraulic Power Train Charge Relief Valve - Adjust
906H, 907H and 908H Compact Wheel Loaders Stopping the Engine if an Electrical Malfunction Occurs
657G Wheel Tractor-Scraper Auger Hydraulic System Pump Rotating Group
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Crankcase Breather - Clean