814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Caterpillar


Parking Brake

Usage:

814F II BXG



Illustration 1g00875109

The parking brake is designed to hold the machine on a maximum 30° slope.

(1) 283-9992 Lined Shoe Assembly

Quantity ... 2
Width of the shoe ... 127 mm (5.0 inch)
Thickness of the friction material on a new shoe ... 6.0 mm (0.24 inch)

(2) Torque for eight bolts ... 105 ± 20 N·m (75 ± 15 lb ft)

(3) Torque for four bolts ... 215 ± 40 N·m (160 ± 30 lb ft)

ReferenceFor additional information about adjusting the parking brake, refer to the Service Manual module Testing and Adjusting, "Parking Brake Actuator - Adjust " for the machine that is being serviced.

Caterpillar Information System:

3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Digital Throttle Position Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Air Inlet Heater Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
AD55B Underground Articulated Truck Machine Systems Gear Pump (Hoist, Brake, and Pilot) - Install
AD55B Underground Articulated Truck Machine Systems Gear Pump (Hoist, Brake, and Pilot) - Remove
AD55B Underground Articulated Truck Machine Systems Gear Pump (Steering) - Install
AD55B Underground Articulated Truck Machine Systems Gear Pump (Steering) - Remove
AD55B Underground Articulated Truck Machine Systems Piston Pump (Hydraulic Fan) - Install
AD55B Underground Articulated Truck Machine Systems Piston Pump (Hydraulic Fan) - Remove
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2006/11/27 New Exhaust Temperature Sensors Are Now Available {1919}
D6T Track-Type Tractor Systems Relief Valve (Main) - Standard
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
D6K Track-Type Tractor Machine Systems Piston Pump (Winch)
D6K Track-Type Tractor Machine Systems Gear Pump (Fan Drive) - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake and Planetary
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Disassemble
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Assemble
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
Field Installation of the Payload Control System{7494} Field Installation of the Payload Control System{7494}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.