Gear Pump (Hoist, Brake, and Pilot) - Install
Installation Procedure
Note: Check the condition of all O-ring seals, the gaskets, and the seals for wear of for damage. Replace the components, if necessary.
- Attach a suitable lifting device to hoist, brake and pilot pump (8). The weight of hoist, brake and pilot pump (8) is approximately 70 kg (155 lb).
Show/hide table
Illustration 1 | g01441079 |
- Install hoist, brake and pilot pump (8) and four bolts (7) .
- Connect tube assembly (6) .
Show/hide table
Illustration 2 | g01441078 |
- Connect hose assembly (5) .
Show/hide table
Illustration 3 | g01441077 |
- Install tube assembly (3) and tighten two hose clamps (4) .
Show/hide table
Illustration 4 | g01441076 |
- Tighten four hose clamps (2) .
Show/hide table
Illustration 5 | g01441075 |
- Connect hose assembly (1) .
Show/hide table
Illustration 6 | g01440999 |
End By:
- Install the hydraulic fan piston pump. Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan) - Install".
- Install the firewalls. Refer to Disassembly and Assembly, "Firewalls - Install".
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
AD55B Underground Articulated Truck Machine Systems Gear Pump (Hoist, Brake, and Pilot) - Remove
AD55B Underground Articulated Truck Machine Systems Gear Pump (Steering) - Install
AD55B Underground Articulated Truck Machine Systems Gear Pump (Steering) - Remove
AD55B Underground Articulated Truck Machine Systems Piston Pump (Hydraulic Fan) - Install
AD55B Underground Articulated Truck Machine Systems Piston Pump (Hydraulic Fan) - Remove
AD55B Underground Articulated Truck Machine Systems Piston Motor (Hydraulic Fan) - Install
AD55B Underground Articulated Truck Machine Systems Piston Motor (Hydraulic Fan) - Remove
AD55B Underground Articulated Truck Machine Systems Piston Motor (Hydraulic Fan) - Assemble
AD55B Underground Articulated Truck Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
AD55B Underground Articulated Truck Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
657G Wheel Tractor-Scraper Auger Hydraulic System Piston Pump (Auger)
953D Track-Type Loader Hydraulic System Accumulator - Test and Charge
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Air Inlet Heater Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Data Link Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Digital Throttle Position Sensor Circuit - Test
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Parking Brake
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2006/11/27 New Exhaust Temperature Sensors Are Now Available {1919}
D6T Track-Type Tractor Systems Relief Valve (Main) - Standard
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
D6K Track-Type Tractor Machine Systems Piston Pump (Winch)