Winch - Install
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Use a suitable lifting device in order to position winch (10) on the machine. The weight of winch (10) is approximately
750 kg (1653 lb) . - Install bolts (7).
- Connect tube assembly (9) and clip (8).
Show/hide table
Illustration 3 g03143636 - Connect hose assemblies (3), (4), and (5).
- Connect harness assembly (6).
Show/hide table
Illustration 4 g03142125 - Install guard assemblies (2).
Show/hide table
Illustration 5 g03141956 - Install guard assembly (1).
Show/hide table
Illustration 1 | g03143569 |
Show/hide table
Illustration 2 | g03143575 |
End By:
- Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Machine Systems Winch - Remove
525C, 535C and 545C Wheel Skidders Power Train Bottom Guard (Rear Axle) - Remove and Install
AccuGrade® GPS (CD700) Text Items - Set
525C, 535C and 545C Wheel Skidders Machine Systems Piston Motor (Winch) - Assemble
525C, 535C and 545C Wheel Skidders Machine Systems Piston Motor (Winch) - Disassemble
AccuGrade® GPS (CD700) Settings - Save
525C, 535C and 545C Wheel Skidders Machine Systems Handle Control (Decking Blade) - Remove and Install
AccuGrade® GPS (CD700) Settings - Restore
854K Wheel Dozer Hydraulic System Oil (Steering) (Brake) - Change
AccuGrade® GPS (CD700) Plan View - Set
AccuGrade® GPS (CD700) Map Recording - Set
AccuGrade® GPS (CD700) Light Bar Scale - Set
D8T Track-Type Tractor Fast Fill Fuel Adapter
631G and 637G Wheel Tractor-Scrapers Machine Systems Filter Bypass (Hydraulic) - Remove and Install
AccuGrade® GPS (CD700) Valve Speed - Set
525C, 535C and 545C Wheel Skidders Machine Systems Piston Motor (Winch) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Piston Motor (Winch) - Install
AccuGrade® GPS (CD700) Vertical Guidance Method - Set
D3K, D4K and D5K Track-Type Tractors Bulldozer Blade Tip
D3K, D4K and D5K Track-Type Tractors Stopping the Engine
D3K, D4K and D5K Track-Type Tractors Engine Starting with Jump Start Cables
Troubleshooting the Fuel Injection System{1250, 1251, 1252} Troubleshooting the Fuel Injection System{1250, 1251, 1252}
C4.4 Industrial Engine Fuel System - Prime
AccuGrade® GPS (CD700) Safety Messages