525C, 535C and 545C Wheel Skidders Machine Systems Caterpillar

Installation Procedure

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.

Show/hide table

Illustration 1	g01270256

1. Use a suitable lifting device to position piston motor (8) on the winch.

2. Install bolts (9).
   Show/hide table

   Illustration 2	g01270251

3. Connect harness assembly (7).

4. Connect tube assemblies (4), (5), and (6).

5. Connect fitting (3).
   Show/hide table

   Illustration 3	g01270248

   Show/hide table

   Illustration 4	g01270250

6. Install guard assemblies (2) and (1).

End By:

1. Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".