Fuel Filter Base - Remove and Install
拆卸程序
注: 清洁度是一项重要的因素。 开始进行拆卸程序之前，必须彻底清洁零部件外部。 这将有助于防止脏污进入内部机构。
注: 在所有软管、软管组件、导线及管子组件上作出识别标记，以便于安装。 插接好所有软管组件和所有管子组件。 这将有助于防止液体渗漏，并有助于防止污物进入系统。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下燃油系统细滤器。 请参考操作和保养手册, "燃油系统细滤器 - 更换"。
- 断开软管组件 (3) 。 断开线束组件 (2) 。 拆下螺栓 (1) 。 拆下燃油滤清器座 (4) 。
Show/hide table
 | |
| 图 1 | g01221485 |
安装程序
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 定位燃油滤清器座 (4) 并安装螺栓 (1) 。 连接软管组件 (3) 和线束组件 (2) 。
Show/hide table
| | |
| 图 2 | g01221485 |
- 安装燃油系统细滤器。 请参考操作和保养手册, "燃油系统细滤器 - 更换"。
Caterpillar Information System:
Installation of a 3306 Engine Emissions Upgrade Group for a D7H Track-Type Tractor {1000} Installation of a 3306 Engine Emissions Upgrade Group for a D7H Track-Type Tractor {1000}
Installation of No. 6 Ripper 1EH on D6R Series III Track-Type Tractors{6310} Installation of No. 6 Ripper 1EH on D6R Series III Track-Type Tractors{6310}
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/02 A New Hose Is Used for the Control Valve (Hydrostatic Drive) {5051, 5057}
C7 and C9 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
525C, 535C and 545C Wheel Skidders Power Train Transmission Pressures - Test and Adjust
Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000} Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000}
D6N Track-Type Tractor Seat
980H Wheel Loader Braking System Service Brake System Pressure - Test
D6R Series III Track-Type Tractor Electronic Control System Components
D10T Track-Type Tractor Machine Systems Implement Pump - Remove
C9 On-highway Engine Flywheel Housing
C7 and C9 Engines for Caterpillar Built Machines Ether Injection System - Test
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Electronic Control Module
D10T Track-Type Tractor Machine Systems Implement Pump - Install
C7 and C9 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
D6N Track-Type Tractor Engine Supplement Engine - Install
D6T Track-Type Tractor Power Train Accumulator
2005/12/12 Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
525C, 535C and 545C Wheel Skidders Machine Monitor System Data Link
2005/12/12 New Extended Life Brake Discs for Severe Applications Are Now Available {4251, 4255}