New Oil Drain Tube for the Turbocharger {1052, 1307}
- Engine: Commercial
- 3500 and 3500B Family All
- G3500 Family All
- Caterpillar Products:
- 3500 Family Generator Sets and Power Modules
- 3500 Family Pumpers
- G3500 Family Generator Sets and Power Modules
Description of Change: Improved oil drain tubes are used on 3500 Engines. The connecting end of the oil drain tube has a reduced outside diameter. This will reduce the potential for breakage due to stress that is put on the tubes by rotation of the turbocharger housing. Alignment of the turbocharger housing is still critical. The turbocharger housing must not put an external load to the oil drain tubes after installation.
Adaptable To: The new oil drain tubes are adaptable to the engines that are listed above, if equipped. All the former parts are cancelled and replaced by the new parts that are listed in Table 1.
Show/hide table
Former Parts and New Parts     | ||
Former Part     | New Part     | Description     |
116-3261     | 284-1054     | Tube     |
116-3262     | 284-1056     | Tube     |
136-3298     | 278-0521     | Tube     |
246-5532     | 278-9545     | Tube     |
7E-5338     | 278-9544     | Tube     |
1W-7990     | 278-9542     | Tube     |
Caterpillar Information System:
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/02 A New Hose Is Used for the Control Valve (Hydrostatic Drive) {5051, 5057}
C7 and C9 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
525C, 535C and 545C Wheel Skidders Power Train Transmission Pressures - Test and Adjust
Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000} Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000}
D6N Track-Type Tractor Seat
980H Wheel Loader Braking System Service Brake System Pressure - Test
D6R Series III Track-Type Tractor Electronic Control System Components
980H Wheel Loader Power Train Axle Oil Cooler Pump and Clutch
D6R Series III Track-Type Tractor Power Train Hydraulic System
D7R Series 2 Track-Type Tractor Power Train Transmission
Installation of No. 6 Ripper 1EH on D6R Series III Track-Type Tractors{6310} Installation of No. 6 Ripper 1EH on D6R Series III Track-Type Tractors{6310}
Installation of a 3306 Engine Emissions Upgrade Group for a D7H Track-Type Tractor {1000} Installation of a 3306 Engine Emissions Upgrade Group for a D7H Track-Type Tractor {1000}
D10T Track-Type Tractor Engine Supplement Fuel Filter Base - Remove and Install
D10T Track-Type Tractor Machine Systems Implement Pump - Remove
C9 On-highway Engine Flywheel Housing
C7 and C9 Engines for Caterpillar Built Machines Ether Injection System - Test
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Electronic Control Module
D10T Track-Type Tractor Machine Systems Implement Pump - Install
C7 and C9 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
D6N Track-Type Tractor Engine Supplement Engine - Install
D6T Track-Type Tractor Power Train Accumulator