New Lubricator Tip Available For Track Seal And Lubrication Testing Group{0600,0645}
Usage:
A new 8T831 Lubricator Tip has been released to replace the canceled 5P2415 Lubricator Tip. The diameter of the tip has been increased from 3.20 mm (.125") to 4.800 mm (.1875"). The new lubricator tip provides a better seal and will not break as easily. The tip is used with the 5P2420 Track Seal and Lubrication Testing Group.
When using the tip, it is helpful to lubricate the tip before inserting the tip in the rubber stopper.
The 8T831 Lubricator Tip.
Caterpillar Information System:
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01 Information For Ordering kPa or Dual Scale Gauges{0600}
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01 Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche{0600,0782,1250}
1985/03/25 New Main Shaft Bearing Assembly Has Reduced End Play{3306}
1985/03/25 Changes To Turbocharged Truck Engines For 1985{1000,1050,1052,1100,1200,1250,1252}
1985/03/18 Improved Oil Ring For Pistons Eliminates Expander Problems That Lead To Ring Breakage During Installation{1215}
1985/03/18 Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}
1985/03/18 New Service Manual Binders Are Made From Thicker Material{0375}
1985/03/18 Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18 New Service Tools Available{0600}
1985/04/01 New Turbocharger Oil Supply Tube Assembly Used{1052,1307}
1985/04/01 More Tools Added To 6V9413 Custom Track Service Tool Kit{0600}
1985/04/08 Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08 Preferred Locations For Water Temperature Protection Devices{7403,7417,7420}
1985/04/08 Electric Hour Meter Failures{7450,7478}
1985/04/08 Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/08 Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/08 Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08 New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08 Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08 Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08 Hardened Spacers Help Keep Bolts Tight{1063}