1985/04/01 Caterpillar


More Tools Added To 6V9413 Custom Track Service Tool Kit{0600}

Usage:


The CTS Tool Kit has been changed to include the 305 mm (12") caliper and two sprocket reusability gauges.

The 305 mm (12") - 4S9405 Caliper and 5P8616 and 5P8617 Sprocket Gauges have been added again because of concerns received from the field. The 305 mm (12") caliper can be used to measure track roller and carrier roller diameters. The sprocket reusability gauges are for use at bushing turn time to indicate whether sprocket segments on D4E through D9H size undercarriages can be reused. See CTS Handbook for instructions on their use.

Caterpillar Information System:

1985/04/01 New Turbocharger Oil Supply Tube Assembly Used{1052,1307}
1985/04/01 New Lubricator Tip Available For Track Seal And Lubrication Testing Group{0600,0645}
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01 Information For Ordering kPa or Dual Scale Gauges{0600}
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01 Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche{0600,0782,1250}
1985/03/25 New Main Shaft Bearing Assembly Has Reduced End Play{3306}
1985/03/25 Changes To Turbocharged Truck Engines For 1985{1000,1050,1052,1100,1200,1250,1252}
1985/03/18 Improved Oil Ring For Pistons Eliminates Expander Problems That Lead To Ring Breakage During Installation{1215}
1985/03/18 Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}
1985/03/18 New Service Manual Binders Are Made From Thicker Material{0375}
1985/04/08 Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08 Preferred Locations For Water Temperature Protection Devices{7403,7417,7420}
1985/04/08 Electric Hour Meter Failures{7450,7478}
1985/04/08 Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/08 Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/08 Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08 New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08 Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08 Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08 Hardened Spacers Help Keep Bolts Tight{1063}
1985/04/08 Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted{1269}
1985/04/08 Track Group Shipping Clamps Are Available Through The Parts Distribution System{4170}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.