1985/04/01 Caterpillar


Information For Ordering kPa or Dual Scale Gauges{0600}

Usage:


All Caterpillar Products

Reference: Service Magazine, December 10, 1984, Page 2, "New Pressure Gauges Have Dual Scales [kPa (psi)]".

The above article tells about the availability of dual scale, fluid filled pressure gauges. Gauges with scales in kPa only are still available. Care must be used when ordering gauges to make sure you get the gauge you want.

If any of the former gauges (Column 3) shown in the chart are ordered, the corresponding gauge with only a kPa scale (Column 2) will be shipped in its place. If a dual scale gauge is desired, the corresponding part number in Column 1 must be ordered.

Caterpillar Information System:

1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01 Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche{0600,0782,1250}
1985/03/25 New Main Shaft Bearing Assembly Has Reduced End Play{3306}
1985/03/25 Changes To Turbocharged Truck Engines For 1985{1000,1050,1052,1100,1200,1250,1252}
1985/03/18 Improved Oil Ring For Pistons Eliminates Expander Problems That Lead To Ring Breakage During Installation{1215}
1985/03/18 Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}
1985/03/18 New Service Manual Binders Are Made From Thicker Material{0375}
1985/03/18 Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18 New Service Tools Available{0600}
1985/03/11 Input Shaft And Flange Available As An Assembly; Makes Alignment Easier{3303}
1985/03/11 Dowtherm 209 Full-Fill Coolant{1350}
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01 New Lubricator Tip Available For Track Seal And Lubrication Testing Group{0600,0645}
1985/04/01 New Turbocharger Oil Supply Tube Assembly Used{1052,1307}
1985/04/01 More Tools Added To 6V9413 Custom Track Service Tool Kit{0600}
1985/04/08 Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08 Preferred Locations For Water Temperature Protection Devices{7403,7417,7420}
1985/04/08 Electric Hour Meter Failures{7450,7478}
1985/04/08 Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/08 Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/08 Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08 New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08 Crankcase Explosion Relief Valve Kit Available{1200,1233}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.