Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
Usage:
Caterpillar Information System:
1985/03/18 New Service Tools Available{0600}
1985/03/11 Input Shaft And Flange Available As An Assembly; Makes Alignment Easier{3303}
1985/03/11 Dowtherm 209 Full-Fill Coolant{1350}
1985/03/11 New Cooling System Temperature Regulator Available{1355}
1985/03/11 New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11 Installation Of Heli-Coils In Holes With Damaged Threads{0600,0670,0671}
1985/03/11 Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11 New Air Cleaner Element Creates Less Restriction{1054}
1985/03/04 Do Not Weld On Painted Surfaces{0350,0679}
1985/03/04 Exhaust Clamp Nut Now Serviced Separately{1061}
1985/03/04 3208 Truck Engine Service Manual Available In Spanish{0375}
1985/03/04 Discontinued D.C. Generators Replaced By Alternators{1404,1405}
1985/03/18 New Service Manual Binders Are Made From Thicker Material{0375}
1985/03/18 Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}
1985/03/18 Improved Oil Ring For Pistons Eliminates Expander Problems That Lead To Ring Breakage During Installation{1215}
1985/03/25 Changes To Turbocharged Truck Engines For 1985{1000,1050,1052,1100,1200,1250,1252}
1985/03/25 New Main Shaft Bearing Assembly Has Reduced End Play{3306}
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche{0600,0782,1250}
1985/04/01 Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01 Information For Ordering kPa or Dual Scale Gauges{0600}
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01 New Lubricator Tip Available For Track Seal And Lubrication Testing Group{0600,0645}
1985/04/01 New Turbocharger Oil Supply Tube Assembly Used{1052,1307}