Crankshaft Rear Seal - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| E | 249-2937 (1) | 密封件定位器组件 | 1 |
| 5P-7310 (1) | 螺栓 | 3 | |
| 9S-8858 (1) | 螺母 (密封件安装工具) | 1 | |
| 6V-6143 (1) | 密封件安装工具 | 1 | |
| 5P-1733 (2) | 密封件定位器组件 | 1 | |
| 5P-7309 (2) | 螺栓 | 3 | |
| 9S-8858 (2) | 螺母 (密封件安装工具) | 1 | |
| 6V-6142 (2) | 密封件安装工具 | 1 | |
Show/hide table
| ( 1 ) | 曲轴齿轮大型导向器（直径约为 85 mm (3.3 in)） |
| ( 2 ) | 曲轴齿轮小型导向器（直径约为 52 mm (2.0 in)） |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 清洁曲轴外径。
Show/hide table
 | |
| 图 1 | g02475268 |
- 使用工具 (E) 将曲轴耐磨套筒 (2) 和曲轴后密封 (1) 作为一个整体进行安装。
注: 把曲轴后密封安装到发动机中，并使指示曲轴转动方向的箭头指向发动机后方。
End By: 安装飞轮。 参考 拆解和组装, "飞轮 - 拆卸和安装"。
Caterpillar Information System:
C27 and C32 Generator Set Engines Crankshaft Rear Seal - Remove
C15 and C18 Petroleum Engines Engine Oil Pan
C27 and C32 Generator Set Engines Flywheel - Remove and Install
320D and 323D Excavators Machine System Specifications Front Lines
C7 Urban Transit Bus Engines Exhaust Particulate Filter Indicator - Check - Diesel Particulate Filter (DPF) Diagnostic Module
Inspecting the Turbocharger for Exhaust Leaks{1052} Inspecting the Turbocharger for Exhaust Leaks{1052}
C15 and C18 Industrial Engines Engine Oil Pan
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
C15 Industrial Engine Sensors and Electrical Connectors
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Assemble
2005/11/21 Improved Joint Assemblies and Seals are Used for the Fuel Lines Group {1274}
C11 and C13 Engines Flywheel
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Electronic Modular Control Panel 3 (EMCP 3)
2011/11/16 A New Connecting Rod Is Used in 3500B and 3500C High Displacement Engines {1218}
2005/11/14 New Aftercoolers are Now Used {1063}
C7 Urban Transit Bus Engines Monitoring System
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
C15-XQ400 Rental Generator Set Plate Locations and Film Locations
C15 and C18 Industrial Engines Vibration Damper
2005/12/12 New Flash File on C18 Marine Engines {7620}
330D and 336D Excavators Leaving the Machine
C175 Generator Set Engines Flywheel Housing - Install
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
C15-XQ400 Rental Generator Set Setup