Crankshaft Rear Seal - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7600     | 滑锤拉拔器     | 1     |
B     | -     | 撬杆     | 1     |
C     | 5P-7312     | 密封件拆卸器     | 1     |
D     | 5P-7314     | 拆卸器环     | 1     |
开始:
- 拆下飞轮。 参考拆解和组装, "飞轮 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 穿过曲轴中的后齿轮,安装飞轮的两颗螺栓和合适的垫圈。
注: 确保拆卸曲轴后密封和曲轴耐磨套筒时,后齿轮保持在位。
- 使用工具 (B) 撬动曲轴耐磨套筒 (2) 唇部的周围。
Show/hide table
图 1 | g01220531 |
注: 确保不要用工具 (B) 损坏飞轮壳。
注: 如果曲轴耐磨套筒开始从曲轴上滑出,则转至步骤 3。
- 用工具 (A) 或者冲头和锤子在曲轴后密封 (1) 上冲出不少于三个的孔。
- 使用工具 (A) 拆下曲轴后密封 (1) 。
- 如有必要,使用工具 (C) 和工具 (D) 拆下曲轴耐磨套筒 (2) 。
Caterpillar Information System:
C15 and C18 Petroleum Engines Engine Oil Pan
C27 and C32 Generator Set Engines Flywheel - Remove and Install
320D and 323D Excavators Machine System Specifications Front Lines
C7 Urban Transit Bus Engines Exhaust Particulate Filter Indicator - Check - Diesel Particulate Filter (DPF) Diagnostic Module
Inspecting the Turbocharger for Exhaust Leaks{1052} Inspecting the Turbocharger for Exhaust Leaks{1052}
C15 and C18 Industrial Engines Engine Oil Pan
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
C15 Industrial Engine Sensors and Electrical Connectors
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Assemble
2005/11/21 Improved Joint Assemblies and Seals are Used for the Fuel Lines Group {1274}
C11 and C13 Engines Flywheel
C11 and C13 Engines Flywheel
C27 and C32 Generator Set Engines Crankshaft Rear Seal - Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Electronic Modular Control Panel 3 (EMCP 3)
2011/11/16 A New Connecting Rod Is Used in 3500B and 3500C High Displacement Engines {1218}
2005/11/14 New Aftercoolers are Now Used {1063}
C7 Urban Transit Bus Engines Monitoring System
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
C15-XQ400 Rental Generator Set Plate Locations and Film Locations
C15 and C18 Industrial Engines Vibration Damper
2005/12/12 New Flash File on C18 Marine Engines {7620}
330D and 336D Excavators Leaving the Machine
C175 Generator Set Engines Flywheel Housing - Install
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install