Battery and Battery Cable - Separate and Connect
Separation Procedure
- Lower the work tool to the ground.
- Remove bolts (1). Remove panel (2) .
Show/hide table
Illustration 1 | g01156873 |
- Move the rubber terminal covers and disconnect battery cables (3) on the battery. Move the battery cables away from the terminals.
Note: This machine does not have a battery disconnect switch.
Show/hide table
Illustration 2 | g01158619 |
- Remove bolt (6) and remove bracket (5) .
- Remove battery (4) from the machine.
Connection Procedure
- Install battery (4) in position in the machine.
Note: The positive battery cable must attach to the positive terminal of the battery.
Note: Check battery terminals and the posts of the battery for cleanliness prior to installation.
Show/hide table
Illustration 3 | g01158619 |
- Connect battery cables (3) and the rubber terminal covers.
- Install bracket (5) and bolt (6) .
- Install panel (2) in position. Secure panel (2) with bolts (1)
Show/hide table
Illustration 4 | g01156873 |
- Start the machine. Check the battery for proper functioning.
Caterpillar Information System:
657G Wheel Tractor-Scraper Engine Air Filter Service Indicator - Inspect/Replace
621G Wheel Tractor-Scraper Engine Air Filter Service Indicator - Inspect/Replace - If Equipped
904B Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
515, 525, 525B, 525C, 535B, 535C, 545 and 545C Wheel Skidders Winch System Pressure - Release
C7 Engines for Caterpillar Built Machines Inlet Manifold - Install
C7 Engines for Caterpillar Built Machines Inlet Manifold - Remove
C9 Engines for Caterpillar Built Machines Cylinder Head - Remove
C15 and C18 Engines for Caterpillar Built Machines E198 Low Fuel Pressure
C9 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 Generator Set Engines CID 0102 FMI 04 Boost Pressure Sensor short to ground
C15 Generator Set Engines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0358 - FMI 06
C9 Engines for Caterpillar Built Machines Cylinder Head - Install
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
657G Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain
631G Wheel Tractor-Scraper Engine Oil (High Speed) and Oil Filter - Change
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0489 - FMI 03
C9 Engines for Caterpillar Built Machines Fan Drive - Remove
904B Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install
637G Wheel Tractor-Scraper Engine Oil (High Speed) and Oil Filter - Change
657G Wheel Tractor-Scraper Cooling System Pressure Cap - Clean/Replace
631G Wheel Tractor-Scraper Engine Oil Level - Check
657G Wheel Tractor-Scraper Cutting Edges and End Bits - Inspect/Replace
AD45B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0190 - FMI 02