1985/01/21 Caterpillar


New Air Cleaner Groups And Valve Mechanism Cover Group Used{1300,1317}

Usage:


3208 Marine Engines ( 1Z ) With Turbochargers And Aftercoolers

Reference: Service Magazine, October 1, 1984, Page 11, Improved Oil Separator Elements Have Longer Service Life.

Description of Change: New air cleaner groups have replaced the air inlet filter group and oil (fumes) separator group which have been canceled. A crankcase breather is now used on 3208 Marine Engines equipped with turbochargers and aftercoolers. The crankcase breather replaces the PCV valves and oil separator group.

The former system was large and often interferred with other components. Also, the elements in the oil separator could become plugged and require maintenance between service intervals. See the reference article.

Adaptable As: The new 7W1157 and 7W2270 Air Cleaner Groups are in effect on 3208 Marine Engines (1Z4622) and are adaptable to all earlier engines. The 7W1157 and 7W2270 Air Cleaner Groups replace the 4W2579 Air Inlet Filter Group and 2W8473 Oil (Fumes) Separator Group which have been canceled. The 7W2270 Air Cleaner Group is used on 3208 Marine Engines (1Z) with commercial ratings. Each of the new air cleaner groups requires use of the 7W1158 Valve Mechanism Cover Group.

The parts needed to adapt the new air cleaner groups to earlier engines are shown in the chart. The illustrations show the new air cleaner group on the engine.


Illustration 1. New air cleaner group - left side.


Illustration 2. New air cleaner group - right side.

Caterpillar Information System:

1985/01/21 Remanufactured Crankshafts Are Available In Standard And Undersize Dimensions (U.S. and Canada){1202,7754}
1985/01/21 New Truck Battery Is Available{1401}
1985/01/21 Correct Use Of 9G6981 Converter Assembly{7300,1400,1410,1406}
1985/01/14 New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14 Additional Components Needed When New Horn Assemblies Are Installed {7303}
1985/01/14 Correct Specifications For Cranskshaft Deflection {1202}
1985/01/14 Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14 Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14 Outright Purchase Of Cores For Remanufactured Products (U.S. And Canada) {7754}
1985/01/14 Remanufactured Electronic Controls (U.S. And Canada) {7400,7754}
1985/01/14 New Engine Time Requirement Guides (TRG) {0374}
1985/01/14 Additions To Reference Chart For Major Production Changes {0374,0375,1000}
1985/01/21 Keep Disconnect Switch Off During Machine Storage{1400,1411}
1985/01/21 New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21 Exhaust Brake Performance Increased{1018}
1985/01/28 Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28 New Service Tools Available{0600}
1985/02/04 Use Care When Removing Oil Pan And 9N3167 Plate{1302}
1985/02/04 Correct Service Information For Air Fuel Ratio Controls Is Available In The Latest Service Manual{1278,1250}
1985/02/04 Wiring Harness Conduit Component Sizes{1400,1408}
1985/02/04 Tighten Bolts To Correct Torque In 3161 Governor{1264}
1985/02/04 Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04 Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04 New Temperature Recorders Available{0600}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.