1985/02/04 Caterpillar


Wiring Harness Conduit Component Sizes{1400,1408}

Usage:


3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516 Generator Sets;
3508, 3512, 3516 Industrial And Marine Engines

There have been requests for a list of the conduit sizes and related fittings used on the above engines.

The sizes of the conduit and fittings are shown in the chart. The size given is the inside diameter of the conduit or fitting.

Caterpillar Information System:

1985/02/04 Correct Service Information For Air Fuel Ratio Controls Is Available In The Latest Service Manual{1278,1250}
1985/02/04 Use Care When Removing Oil Pan And 9N3167 Plate{1302}
1985/01/28 New Service Tools Available{0600}
1985/01/28 Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/21 Exhaust Brake Performance Increased{1018}
1985/01/21 New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21 Keep Disconnect Switch Off During Machine Storage{1400,1411}
1985/01/21 New Air Cleaner Groups And Valve Mechanism Cover Group Used{1300,1317}
1985/01/21 Remanufactured Crankshafts Are Available In Standard And Undersize Dimensions (U.S. and Canada){1202,7754}
1985/01/21 New Truck Battery Is Available{1401}
1985/01/21 Correct Use Of 9G6981 Converter Assembly{7300,1400,1410,1406}
1985/01/14 New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/02/04 Tighten Bolts To Correct Torque In 3161 Governor{1264}
1985/02/04 Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04 Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04 New Temperature Recorders Available{0600}
1985/02/11 New Flashlight On 6V5000 Infrared Thermometer Group{0776}
1985/02/11 Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11 New Guide Assembly Used In Oil Level Gauge Group{1326,1300}
1985/02/11 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/18 Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18 New Pressure Conversion Chart Available{0600}
1985/02/18 New Transmission Control Valve And Pressure Relief Valve Are Used With High Flow Oil Pump{3313,3310}
1985/02/18 Bleed Holes On Parts Service Cylinder Heads{1100,1101}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.