Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050} Caterpillar

Caterpillar Products: All

Engine:Commercial All Diesel

Engine:Truck All

Introduction

© 2012 Caterpillar All Rights Reserved. This guideline is for the use of Cat Dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.

This Reuse and Salvage Guideline contains the necessary information in order to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made in order to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.

For questions or additional information concerning this guideline, submit a form for feedback in the Service Information System. In order to address an urgent issue, use the following resources in order to communicate your request to Caterpillar Repair Process Engineering:

• Caterpillar Dealer Technical Communicator

• Dealer Solution Network

• Caterpillar Technical Representative

• Knowledge Network

Contents

This guideline enables dealers and customers to benefit by providing an index for the current wall charts. The index will provide an easy way to locate the media numbers and the titles of the wall charts. This guideline must be used with the latest information that is available from Caterpillar Inc. in order to be sure that improvements are incorporated.

Wall charts are publications that generally contain the following items:

• Disassembly procedures

• Assembly procedures

• Special torques

• Torque sequences

The wall charts are printed on paper that is resistant to stains and tears. Wall charts cover selected models of the following items:

• Drivetrain

• Engines

• Hydraulics

• Undercarriage

Viewing Wall Charts

Wall charts cannot be viewed in SIS Web. To view the charts on the Caterpillar Inc. website, go to the Repair Process Engineering site at https://dealer.cat.com/cda/layout?m=486576&x=7 by copying this address into a web browser. On the top right of the page in the Related Links box, choose Wall Charts.

An alternative way that these charts can also be viewed, is to go to https://dealer.cat.com/, choose Product Support at the top menu bar, then choose Service Operations, and select RPE - Repair Process Engineering on the left navigation bar. On the top right of the page in the Related Links box, choose Wall Charts.

You will not be able to print these wall charts. You will not be able to change these wall charts.

Ordering Wall Charts

To order wall charts, in the same Related Links box, choose Ordering Media & Subcriptions, and click the Midland link at the top right of the page.

Note: A user name and password are required to access Midland.

Wall Charts