Valve Mechanism
Show/hide table
| |
| 图 1 | g02539717 |
|
(1) 摇臂
(5) 凸轮轴 (7) 气门桥 (3) 调整螺钉 | |
Show/hide table
| 148-7482 燃油泵和气门机构、 343-4437 燃油泵和气门机构、 343-4438 燃油泵和气门机构和 266-3699 燃油泵和气门机构的技术规格。 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 2 | 1 | 276-5317 螺母 | 拧紧至扭矩为 |
| 4 | 1 | 307-8322 摇臂轴组件 | 组装前，用清洁的发动机机油进行润滑。 |
| 新摇臂轴组件的直径为 |
|||
| 摇臂中用于安装摇臂轴组件的孔径为 |
|||
| 6 | - | - | 气门间隙设定：
进气门为 排气门为 |
| 对于配备可变气门执行器的发动机，请参阅技术规格, "可变气门执行器"以了解有关摇臂组件安装的信息。
对于配备 CAT 压缩制动器的发动机，请参阅技术规格, "CAT 压缩制动器"，以了解摇臂组件的正确安装步骤。 |
|||
Caterpillar Information System:
3500B Series II Marine Engines Replacing the ECM
C1.5 and C2.2 Generator Set Engines Flywheel Housing - Remove and Install
C1.5 and C2.2 Generator Set Engines Crankshaft Rear Seal - Install
C1.5 and C2.2 Generator Set Engines Crankshaft Rear Seal - Remove
C27 and C32 Industrial and Petroleum Engines Air Inlet and Exhaust Lines
C32 Auxiliary Engine Fuel and the Effect from Cold Weather
C15 Petroleum Generator Set Engines Vibration Damper and Pulley
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0247 FMI 12
G3500 Engines Control Panel
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Lowering) - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Lowering) - Disassemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Lowering) - Install
C15 Petroleum Generator Set Engines Engine Oil Pan
C175 Generator Set Engines Exhaust Manifold - Remove and Install
C1.5 and C2.2 Generator Set Engines Flywheel Housing - Remove and Install
C1.5 and C2.2 Generator Set Engines Crankshaft Pulley - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
3500 Engines for Caterpillar Built Machines Manual Shutoff
C175 Generator Set Engines Camshaft - Remove
C1.5 and C2.2 Generator Set Engines Valve Mechanism Cover - Remove and Install
Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050} Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175} Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
TH48-E80 Petroleum Transmission Power Train Electronic Control System Shift Inhibit Function
C27 and C32 Generator Set Engines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt