Engine Oil Pan
Show/hide table
| 图 1 | g01443689 |
俯视图 | |
Show/hide table
| 图 2 | g01443695 |
右视图 | |
注: 将眼圈 (1) 从两个油底壳密封垫 (4) 上拆下。 将一个密封垫组装到油底壳 (7) 和盘 (6) 之间。 将第二个密封垫组装到盘 (6) 和缸体之间。
(2) 两个管塞的扭矩 ... 82 ± 10 N·m (60 ± 7 lb ft)
(3) 在要密封的两个 O 形密封环孔上稍微涂抹润滑剂。
(5) 40 个螺栓的扭矩 ... 55 ± 10 N·m (41 ± 7 lb ft)
(8) 排放螺塞的扭矩 ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
3500B Series II Marine Engines Replacing the ECM
C1.5 and C2.2 Generator Set Engines Flywheel Housing - Remove and Install
C1.5 and C2.2 Generator Set Engines Crankshaft Rear Seal - Install
C1.5 and C2.2 Generator Set Engines Crankshaft Rear Seal - Remove
C27 and C32 Industrial and Petroleum Engines Air Inlet and Exhaust Lines
C32 Auxiliary Engine Fuel and the Effect from Cold Weather
C15 Petroleum Generator Set Engines Vibration Damper and Pulley
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0247 FMI 12
G3500 Engines Control Panel
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Lowering) - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Lowering) - Disassemble
C175 Generator Set Engines Exhaust Manifold - Remove and Install
C1.5 and C2.2 Generator Set Engines Flywheel Housing - Remove and Install
C1.5 and C2.2 Generator Set Engines Crankshaft Pulley - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
3500 Engines for Caterpillar Built Machines Manual Shutoff
C175 Generator Set Engines Camshaft - Remove
C1.5 and C2.2 Generator Set Engines Valve Mechanism Cover - Remove and Install
Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050} Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175} Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
TH48-E80 Petroleum Transmission Power Train Electronic Control System Shift Inhibit Function
C27 and C32 Generator Set Engines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C27 and C32 Generator Set Engines CID 0175 FMI 04 Engine Oil Temperature short to ground