Gear Pump (Torque Converter and Transmission) - Disassemble
解体步骤
Show/hide table
需要的工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 1P-1857     | 挡圈钳     | 1     |
开始:
- 卸下齿轮泵。 请参阅解体和组装, "变速箱充油和扫油齿轮泵 - 拆卸"。
- 卸下螺栓 (1) 和盖 (2) 。
Show/hide table
图 1 | g01186182 |
- 卸下 O 形密封圈 (3) 和轴承 (4) 。
Show/hide table
图 2 | g01186183 |
- 使用工具 (A) ,卸下挡圈 (5) 。
Show/hide table
图 3 | g01186185 |
- 卸下唇形密封 (6) 。
- 卸下盘 (7) 、密封 (8) 、密封 (9) 和盘 (10) 。
Show/hide table
图 4 | g01186186 |
- 卸下盘 (11) 、齿轮 (12) 和齿轮 (13) 。
Show/hide table
图 5 | g01186188 |
- 卸下盘 (14) 。
Show/hide table
图 6 | g01186189 |
- 卸下盘 (15) 、密封 (16) 、密封 (17) 和盘 (18) 。
Show/hide table
图 7 | g01186190 |
- 卸下轴承 (19) 。
- 卸下壳体 (20) 。
Show/hide table
图 8 | g01186191 |
- 卸下 O 形密封圈 (21) 和联轴节 (22) 。
Show/hide table
图 9 | g01186195 |
- 使用工具 (A) ,卸下挡圈 (23) 。
- 卸下 O 形密封圈 (25) 和壳体 (24) 。
- 卸下 O 形密封圈 (26) 和轴承 (27) 。
Show/hide table
图 10 | g01186196 |
- 卸下盘 (28) 、密封 (29) 、密封 (30) 和盘 (31) 。
Show/hide table
图 11 | g01186198 |
- 卸下盘 (32) 、齿轮 (33) 和齿轮 (34) 。
Show/hide table
图 12 | g01186199 |
- 从壳体 (35) 上卸下盘 (36) 。
Show/hide table
图 13 | g01186200 |
- 卸下盘 (37) 、密封 (38) 、密封 (39) 、盘 (40) 和轴承 (41) 。
Show/hide table
图 14 | g01186201 |
- 卸下双头螺柱 (42) 。
Show/hide table
图 15 | g01186202 |
Caterpillar Information System:
2005/08/15 Improved Spin-On Engine Oil Filters are Used {1308}
C6.6 Industrial Engine Crankcase Breather
C13 and C15 On-highway Engines Engine Speed - Test
C13 and C15 On-highway Engines Sensor Supply - Test
C13 and C15 On-highway Engines Shutdown Timer (PTO) - Test
TH48-E80 Oil/Gas Transmission Gear Pump (Torque Converter and Transmission) - Install
3618 Engine Auxiliary Water Pump - Disassemble
TH48-E80 Oil/Gas Transmission Gear Pump (Torque Converter and Transmission) - Remove
C9 Generator Set Electronic Modular Control Panel 3 (EMCP 3)
C13 and C15 On-highway Engines Retarder - Test
Caterpillar 270 Air Compressor Rebuilt Air Compressor - Test
C13 and C15 On-highway Engines Variable Valve Actuator - Test
TH48-E80 Oil/Gas Transmission Gear Pump (Torque Converter and Transmission) - Assemble
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Starting and Stopping
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
C15 On-Highway Engine Fuel System - Prime
C-12 Generator Set Engine CID 0091 FMI 08 Throttle Position signal abnormal
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Install
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Disassemble
3618 Engine Auxiliary Water Pump - Assemble
3456 Generator Sets Starting the Engine - EMCP 3 (If Equipped)
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Device Bus Network - Modbus Communications
3456 Generator Sets Manual Stop Procedure
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Assemble