Steering Stop - Check
Show/hide table
 | |
| Illustration 1 | g00952594 |
Check the clearance between the front frame and the rear frame steering stops.
Reference: For additional information about the correct procedure, refer to Steering System Systems Operation, Testing and Adjusting, "Steering Neutralizer Valve - Check and Adjust" for the machine that is being serviced.
Caterpillar Information System:
AD45 and AE40 II Underground Articulated Trucks Steering Cylinder Bearings - Lubricate
2003/01/27 The Lockup Clutch May be Enabled or Disabled with Cat ET {0785, 3102}
D6N Track-Type Tractor Engine Supplement Engine - Install
D6N Track-Type Tractor Engine Supplement Engine - Remove
963C Track-Type Loader Monitoring System
3054E Industrial Engine Engine Oil Filter Base - Remove and Install
854G Wheel Dozer Transmission Oil Sample - Obtain
963C Track-Type Loader Operator Controls
D5N Track-Type Tractor Power Train Steering Clutch and Brake - Assemble
D5N Track-Type Tractor Power Train Steering Clutch and Brake - Disassemble
963C Track-Type Loader Seat
963C Track-Type Loader Daily Inspection
3054E Industrial Engine Engine Oil Cooler - Remove
AD45 and AE40 II Underground Articulated Trucks Steering Tank Screen - Clean
3054E Industrial Engine Engine Oil Cooler - Install
C13, C15, and C18 Tier 4 Final Engines Water Pump
3054E Industrial Engine Water Pump - Remove and Install
3406E Engine for Caterpillar Built Machines Analog Sensor Supply Circuit - Test
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Lift Cylinder - Remove and Install
AD45 and AE40 II Underground Articulated Trucks Steering System Oil - Change
963C Track-Type Loader Engine Starting with Jump Start Cables
2003/01/27 Correct Polarity Is Required for Back-Up Alarm Functionality {7406}
AD45 and AE40 II Underground Articulated Trucks Steering System Oil Filter - Replace