Transmission Oil Sample - Obtain
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照本地法规和指令处置所有液体。 |
Show/hide table
图 1 | g00952556 |
变速器不备有油样采样阀。 要取得变速器油的油样需要用真空泵或类似的设备。 变速器油的油样可以从变速器油滤清器壳体里取得。 把变速器油滤清器 (1) 盖子上的螺塞 (2) 卸下。 从开口处采取油样,再把螺塞装上。
参考参阅特别出版物, SEBU6250, "卡特彼勒 机器用油推荐"以取得有关油样方面更详细的资料。
Caterpillar Information System:
963C Track-Type Loader Operator Controls
D5N Track-Type Tractor Power Train Steering Clutch and Brake - Assemble
D5N Track-Type Tractor Power Train Steering Clutch and Brake - Disassemble
963C Track-Type Loader Seat
963C Track-Type Loader Daily Inspection
2003/02/03 Special Instruction, REHS1238, "Obtaining Factory Passwords and Software Enabled Attachments" is Available {7610}
D6N Track-Type Tractor Engine Supplement Fan Drive - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Introduction - 938G Series II Wheel Loader
3054E Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
2003/02/03 Machine Components are Available for the Field Installation of the Product Link System {1408, 7602}
2003/02/03 New Flash Software is Available {7620}
3054E Industrial Engine Piston Cooling Jets - Remove and Install
3054E Industrial Engine Engine Oil Filter Base - Remove and Install
963C Track-Type Loader Monitoring System
D6N Track-Type Tractor Engine Supplement Engine - Remove
D6N Track-Type Tractor Engine Supplement Engine - Install
2003/01/27 The Lockup Clutch May be Enabled or Disabled with Cat ET {0785, 3102}
AD45 and AE40 II Underground Articulated Trucks Steering Cylinder Bearings - Lubricate
AD45 and AE40 II Underground Articulated Trucks Steering Stop - Check
3054E Industrial Engine Engine Oil Cooler - Remove
AD45 and AE40 II Underground Articulated Trucks Steering Tank Screen - Clean
3054E Industrial Engine Engine Oil Cooler - Install
C13, C15, and C18 Tier 4 Final Engines Water Pump
3054E Industrial Engine Water Pump - Remove and Install